摘要
目的:验证"热力灭菌过程中温度计量参数校准规范"规定的灭菌器内温度测量控制仪器在线校准方法,并对标准检测装置的准确性和可靠性进行论证。方法:采用温度压力检测装置,在空载和满载两种条件下分别运行灭菌程序,通过软件监测灭菌过程。结果:实验验证规范中在线校准方法的可行性,也验证了标准检测装置的准确性和可靠性。结论:通过实验证明,该规范的校准方法操作简便,可行性强,操作人员可以依据规范正确校准灭菌器的温度,确保灭菌器的质量安全。
Objective：To alidate the On-line calibration method of temperature measuring instrument about Calibration specification of the temperature measurement parameters for the thermal sterilization process.It is also test the accuracy and reliability of detection device.Methods：The temperature and pressure detection device is used,in the two kinds of conditions in the no-load.When the sterilizing procedures runs,the sterilization process is monitored through the software.Results：It is verified the feasibility of on-line calibration method in the specification through the experiment.The accuracy and reliability is verified of test device.Conclusion：experiments show that the calibration method of the standard is simple and feasible,the operator can adjust temperature of sterilizer based on specification they can ensure the quality and safety of sterilizer.
出处
《中国医学装备》
2013年第11期13-17,共5页
China Medical Equipment
基金
军事医学计量科研专项课题(2011-JL2-039)"医用灭菌设备温度计校准规范实验验证及检测装置准确性论证"
关键词
灭菌
温度
校准
实验
验证
Sterilization
Temperature
Calibration
Test
Verification
