摘要
针对插装溢流阀中阻尼孔的取值范围进行研究。根据插装溢流阀的工作原理和结构特点,建立了插装溢流阀的数学模型,在此基础上应用AMESim软件建立了插装溢流阀的AMESim仿真模型,并且通过理论计算验证了仿真模型的正确性。以某一型号的插装溢流阀为例,通过AMESim仿真和理论计算得到了此型号插装溢流阀阻尼孔的取值范围为0.95~10.1 mm。
According to the operation principle and construction features of cartridge relief valve,the mathematic model was es-tablished. Then its AMESim simulation model was achieved. Through theoretical calculation,the simulation model was proved right. Taking a certain type of cartridge relief valve as an example,by using simulation model and theoretical calculation,the value of orifice was demonstrated to be from 0.95 mm to 10.1 mm.
出处
《机床与液压》
北大核心
2013年第21期143-145,共3页
Machine Tool & Hydraulics
基金
河北省高等学校科学技术研究青年基金项目(2010223)
关键词
插装溢流阀
建模与仿真
阻尼孔
定量分析
Cartridge relief valve
Modeling and simulation
Orifice
Quantitative analysis