期刊文献+

某垃圾炉排研发制造企业职业病危害现状调查

Occupational Hazards in a R&D Enterprise Producing Garbage Grate
原文传递
导出
摘要 目的了解垃圾炉排研发制造生产企业存在的职业病危害因素和危害程度,以及所采取的职业病危害防护措施,为该行业的职业卫生工作提供参考依据。方法采用现场职业卫生学调查和职业病危害因素检测,选择有代表性的粉尘6个检测点、锰及其化合物4个检测点、噪声10个检测点、苯系物1个检测点。结果该企业存在的主要职业病危害因素有粉尘、锰及其化合物、噪声及苯系物。其中粉尘、锰及其化合物、苯系物合格率为100%;噪声合格率为66.7%。结论粉尘、噪声作为垃圾炉排制造行业的重点控制因素,其所涉及的超标岗位为关键控制点。 Objective To understand the occupational to facilitate proper occupational hazards prevention hazards in a R&D enterprise producing garbage grate so as measures. Methods Field survey of occupational hygiene and detection of occupational hazards factors were both conducted. The spots were selected as: dust spots, 6 ; manganese and its compounds, 4; noise 10; benzene compound, 1. Results The vocational hazard factors in- cluded dust, manganese and its compounds, noise and benzene. The qualified rate of dust, manganese and its compound, benzene compound were all 100% and the qualified rate of noise was 66. 7%. Conclusion Dust and noise are the major vocational hazards in industry of garbage grate and involved work posts should be paid equivalent attention to.
出处 《预防医学情报杂志》 CAS 2013年第11期1001-1004,共4页 Journal of Preventive Medicine Information
关键词 垃圾炉排 职业病危害 危害因素 garbage grate occupational hazard risk factor
  • 相关文献

参考文献8

  • 1GBZ159-2004工作场所空气中有害物质监测的采样规范[S].2004.
  • 2GBZ/T192.1-2007工作场所空气中粉尘测定第1部分:总粉尘浓度作业场所空气中粉尘测定方法[S].2007.
  • 3GBZ/T189.8-2007.工作场所物理因素测量第8部分:噪声[S].2007.
  • 4GBZ/T160.42-2004工作场所空气中有毒物质测定方法[S].2004.
  • 5GBZ2.1-2007工作场所有害因素职业接触限值化学有害因素[S].2007.
  • 6GBZ2.2-2007.工作场所有害因素职业接触限值第2部分:物理因素[S].2007.
  • 7宫吴健,胡晓雷,阴旅宁,邱乐平,兰亚佳.自贡市46个重点工业建设项目职业病危害评价分析[J].中国卫生工程学,2011,10(4):289-291. 被引量:3
  • 8袁保来.电焊作业危害的防治措施[J].安全,2008,29(9):47-48. 被引量:3

二级参考文献4

  • 1GBZ/T197-2007,建设项目职业病控制效果评价技术导则[S].
  • 2GBZ1-21310,工业企业设计卫生标准[S].
  • 3GBZ 2.1-2007,工作场所有害因素职业接触限值第1部分:化学有害因素[S].
  • 4GBZ2.2-2007,工作场所有害因素职业接触限值第2部分:物理因素[S].

共引文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部