摘要
介绍了美军标MIL-PRF-24667C中对舰船甲板防滑涂料的摩擦系数、缆绳磨损和耐磨损性的测试程序,参照测试程序对含有不同数量和粒径的Al2O3防滑粒料的辊涂防滑涂层进行了测试,研究了防滑涂层摩擦系数的均匀性,干态、水态和油态摩擦系数,磨损前后的摩擦系数变化以及涂层的耐磨和缆绳磨损性能;用18目、24目和36目的 Al2O3防滑粒料按照1∶6∶3的质量比配制了混合防滑粒料,由该混合粒料形成的涂层被证明具有优异的摩擦系数、缆绳磨损和耐磨性能。
This article has described the test procedures of coefficient of friction ( COF), wearing of infesting cable and resistance to wear of non-skid coating system applied on ships in MIL-PRF-24667C standard. Referring to above test procedures, the tests were carried out to rolling applied non-skid coatings composed of different quantity and size of nonskid particles. Focusing on the uniformity of COF, COF in dry, water and oily state, the initial COF and after wearing COF, wearing of mTesting cable and resistance to wear of coating were studied. A mixed A1203 nonskid particles made up of 18, 24 and 36 mesh in the mass proportion of 1:6:3 was also
出处
《涂料工业》
CAS
CSCD
北大核心
2014年第1期6-11,共6页
Paint & Coatings Industry
关键词
摩擦系数
防滑涂料
防滑粒料
耐磨损性
缆绳磨损
coefficient of friction
non-skid coating
nonskid particles
resistance towear
wearing of arresting cable