期刊文献+

燃机平面蜗轮国产化试制燃机平面蜗轮国产化试制

Domestic Trial Production of Planar Worm Gear in Gas Turbine
下载PDF
导出
摘要 平面包络环面蜗轮副与普通圆柱蜗杆副相比,在啮合特性上有许多不同,由于同时啮合的齿数多,所以是一种体积小、承载大的特殊蜗杆副。在制造加工上与普通圆柱蜗轮副相比,工艺方法完全不同。文章主要论述了:根据平面包络环面蜗轮副的形成原理,通过改造现有普通梳齿机达到自主生产满足使用要求的平面包络环面蜗轮副产品的方法。 Comparitlg the planar enveloping woma gear pair with the nonual cylindrical worm gear pair, there are many differences in the meshing characteristics. It is a special woma pair which works under heavy load but with small size, and more teeth are meshed at the same dine. The manufhcturing method of the planar enveloping wonu gear pair is completely different with the normal cylin- drical worm gearing pairs. This paper mainly discusses the method, by remodeling existing rack shaping machine, to fabricate the re- quired planar enveloping worm gear pair based on its tbmaation principle.
出处 《东方汽轮机》 2013年第4期35-38,共4页 Dongfang Turbine
关键词 平面包络环面蜗轮副 平面蜗轮 梳齿机 工艺母面倾斜角 工艺齿形角 plallar enveloping worm gear pair, planar worm gear, rack shaping machine, inclination angle of generatrix in process,tooth profile angle in process
  • 相关文献

参考文献3

  • 1齿轮手册编委会.齿轮手册:第2版[M]{H}北京:机械工业出版社,2000.
  • 2周良墉.环面蜗杆修型原理及制造技术[M]{H}长沙:国防科技大学出版社,2005.
  • 3董学朱.环面蜗杆传动设计和修形[M]{H}北京:机械工业出版社,2004.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部