期刊文献+

热等静压处理对K4169高温合金显微形貌及性能的影响 被引量:5

Effect of HIP Treatment on Microstructures and Properties of K4169 Superalloy
下载PDF
导出
摘要 研究了热等静压处理对K4169高温合金显微形貌和常温、高温下拉伸和持久性能的影响。结果表明,热等静压后再进行标准热处理可有效消除薄壁铸件中的Laves相,使得室温和650℃下的拉伸性能均有明显提高,持久寿命从标准热处理态的26.7 h提高到89.5 h。 The effect of hot isostatic pressing (HIP) on the microstructures, tensile properties and stress rupture properties of K4169 superalloy casting at both room temperature and 650℃ was investigated. The results show that the Laves phase of the superalloy can be eliminated after HIP and further standard heat treatment. Furthermore, the tensile properties of the HIP state superalloy were improved greatly and the stress rupture life increases from 26.7 h to 89.5 h.
出处 《铸造技术》 CAS 北大核心 2013年第12期1646-1648,共3页 Foundry Technology
基金 国家973计划资助项目(613137)
关键词 热等静压 高温合金 LAVES相 性能 hot isostatic pressing superalloy Laves phase property
  • 相关文献

参考文献12

  • 1Thomas A,EI-Wahabi M,Cabrera J M,et al. High temperature deformation of Inconel 718 [J]. Journal of Materials Processing Technology, 2006, 177(1 ) : 469-472.
  • 2Kuo C M,Yang Y T,Bor H Y,et al. Aging effects on the microstructure and creep behavior of lnconel 718 superalloy [J] Materials Science and Engineering : A, 2009,510-511 : 289-294.
  • 3Reed R C. The superalloys:fundamentals and applications[M] Cambridge : Cambridge Univ Pr, 2006.
  • 4郑运荣.我国低Cr高W系列铸造镍基高温合金的发展与应用[J].航空材料学报,2003,23(z1):227-232. 被引量:16
  • 5李爱兰,汤鑫,盖其东,曹腊梅,刘发信.热处理工艺对K4169合金微观组织的影响[J].航空材料学报,2006,26(3):311-312. 被引量:28
  • 6韩梅,骆宇时.热等静压对DD3单晶高温合金组织与性能的影响[J].材料工程,2008,36(8):40-43. 被引量:12
  • 7张树才,郭志俊,王跃旗,李爱民,王晋伟,冯云虎.涡轮叶轮用铸造高温合金的热等静压处理研究[J].兵器材料科学与工程,2011,34(4):67-69. 被引量:7
  • 8黄荣芳,唐亚俊,李英敖,等.热等静压处理对铸造镍基高温合金力学性能的影响[J].金属学报,1984,20(5):288-295.
  • 9Wei C N,Bor H Y,Chang L. Effect of hot isostatic pressing on microstructure and mechanical properties of CM-681 LC nickel-base superalloy using microcast [J]. Materials Transactions. 2008,49( 1 ) : 193 -201.
  • 10Ferrie E,Buffiere J Y,Ludwig W. 3D characterisation of the nucleation of a short fatigue crack al a pore in a cast Al alloy using high resolution synchrotron microtomography [J]. International Journal of Fatigue, 2005,27( 10- 12) : 1215-1220.

二级参考文献37

  • 1李爱兰,汤鑫,盖其东,曹腊梅,刘发信.热处理工艺对K4169合金微观组织的影响[J].航空材料学报,2006,26(3):311-312. 被引量:28
  • 2J. F. Radavieh and A. Fort. Effects of Long Time Exposure in Alloy 625 at 1 200°F, 1 400°F and 1 600°F [C]. In proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives, Warrendale: TMS, 1994 : 635-647.
  • 3Xishan Xie, Gailian Wang, Jianxin Dong, et al. Structure Stability Study on a Newly Developed Nickel-Base Superalloy-Allvac@718Plus^TM[C]. In proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives, Warrendale: TMS, 2005: 179- 191.
  • 4Rao G Appa, Mahendra Kumar. Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718 [J]. Materials Science & Engineering A, 2003,355 : 114-125.
  • 5R.G. Thompson and B. A. Boutwell. Microstructure Analysis of Fine Grain Alloy 718 Casting [C]. In proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives, Warrendale: TMS, 1994 : 213-228.
  • 6Collier J P, Wong S H, Philips J C, et al. The effect of varying Al Ti and Nb content on the phase stability of inconel 718[J]. Metall Trans A,1988,19A:1 657-1 666.
  • 7Dong J X, Xu Z C, Xie X S, et al. Research on microstructure and properties in modified inconel718 superalloys[J]. Materials Science Progress, 1993,7 (2) : 105-109.
  • 8F. Xu, E. Guo, EA. Loria and P. Zhang. Thermal Stability of Modified 718 Alloys Aged for 2 000 Hours at 700 ℃ [C]. In proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives, Warrendale: TMS, 1997 : 503-509.
  • 9V. B. Kireev and O. V. Makushok. Structure and Mechanical Properties of Type 718 Alloy with Increased Content of Refractory Elements[C]. In proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives, Warrendale: TMS, 1991: 955-964.
  • 10[2]CARLSON R G,RADAVICH J F.Microstructural Characterization of Cast 718[A].Superalloy 718-Metallurgy and Applications[M].The Minerals,Metals & Materials Society,1989.

共引文献58

同被引文献37

引证文献5

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部