摘要
讨论了一种H面磁耦合波导-微带过渡结构,该结构从波导短边平行于H面插入耦合探针。设计使用Ansoft公司的三维电磁仿真软件HFSS对影响指标的耦合探针插入深度、探针宽度等参数进行优化。按照参数优化最终结果加工一对背靠背样件,测试得到:在30GHz^36GHz频率范围内,插损优于1.5dB,回波损耗大于16dB。实验证明该过渡结构具有结构简单,插损小,频带宽,便于加工等优点。
The paper discussed an H-plane waveguide-microstrip transition. The probe was parallel to H-plane and inserted to the waveguide from the short side of the waveguide. HFSS was used to simulate and optimize the location and width of the probe. A back to back transition was fabricated and measured, the result showed us that the insertion loss between 30GHz-36GHz was less than 0. 8dB, and the return loss was greater than 16dB. The structure had the advantages of simple structure, low insertion loss, wide band, easy fabrication etc.
出处
《舰船电子工程》
2013年第12期155-156,162,共3页
Ship Electronic Engineering
关键词
H面
磁耦合
KA波段
波导-微带
过渡
H-Plane, magnetic coupling, Ka band, waveguide-microstrip, transition