摘要
根据有限元方法运用有限元分析软件Nastran建立单绳单筒缠绕式矿井提升机模型,并以轴承底座、主轴和左、右两个支轮作为优化对象进行动态响应分析.在保证零件的强度和刚度要求下,每个零件的质量均有所降低,为该零件的轻量化设计提供了参考依据.
With finite element method (FEM), a single rope-single tank intertwined type of mine hoist model is created on the basis of the software Nastran, and then a dynamic response analysis is conducted on the proposed model. On the premise of ensuring the strength and the stiffness, the bearing base, main shaft and the left and right sub-wheels are taken as the optimized objects. The numerical result demonstrates that the mass of each component is reduced respectively, which provides a practice guidance for the light weight design and development of the proposed model.
出处
《湖南文理学院学报(自然科学版)》
CAS
2013年第4期47-50,共4页
Journal of Hunan University of Arts and Science(Science and Technology)
关键词
矿井提升机
动态响应
轴承底座
结构优化
mine hoist
dynamic response
bearing base
structural optimization