喇叭裙丝绺方向及裙片数对造型效果的影响

Effects of grain directions of fabrics and the number of skirt pieces on flared skirt appearance shape

在了解喇叭裙结构和工艺的基础上,通过实验研究喇叭裙的最佳丝绺方向和裙片数.选用同一种面料,并按不同斜裁角度,不同裙片数量制作成喇叭裙,然后通过拍照进行数据处理,得出斜裁角度及裙片数对喇叭裙外观形态的影响以及最佳斜裁角度及裙片数,从而优化喇叭裙的外观形态.结果表明,选用涤棉混纺面料制作喇叭裙时,在裙片数相同时,各片中线沿面料经向裁剪制作出的喇叭裙外观形态较好;在喇叭裙各片中线与面料经向夹角相同时,10片裙的外观形态较好.

On the basis of understanding the structure and process of the flared skirt, through the test, the best grain direction and the number of the flared skirt pieces were studied . Through making flared skirts which select the same fabric, different angles （angle between warp of fabric and midline of each skirt piece） and different number of flared skirt pieces and taking pictures, processing photos to conclude the effect of the angle between warp of fabric and midline of each skirt piece and the number of skirt pieces on the appearance shape of the flared skirt and the best angle as well as the number of skirt pieces, to optimize the appearance shape of flared skirt. It is drawns that when the number of pieces of the flared skirt made of polyester cotton blended fabric is same, the angle between warp of fabric and skirt sagging is 0, the appearance shape of flared skirt is better; when the angle between warp of fabric and skirt sagging is same, the number of the flared skirt pieces are 10, the appearance shape of flared skirt is better.