期刊文献+

高Cr铸铁轧辊的研制与生产 被引量:3

Development and Production of High Cr Cast Iron Roller
下载PDF
导出
摘要 介绍了采用卧式离心铸造生产高Cr铸铁轧辊的工艺流程。通过合理选择化学成分及对轧辊进行高温淬火和二次回火热处理,得到了主要是屈氏体+马氏体的基体组织,奥氏体体积分数小于5%,碳化物以M7C3型为主,辊身硬度满足要求。由于在工作层高Cr铸铁与芯部球铁之间设置了中间层,确保芯部材料的w(Cr)量在0.5%以下,使芯部球铁的抗拉强度达到了450 MPa以上。轧辊投入生产结果显示,未发生因轧辊质量问题而影响正常生产,轧辊的耐磨性和抗损坏能力优良,获得了客户的认可。 The production process of using horizontal centrifugal casting process to produce high Cr cast iron roller was introduced.As the result of using rational chemical composition and conducting high temperature quenching and two times tempering treatment,the matrix structure of roller was consisted mainly of troostite + martensite with austenite content less 5%,the carbide type was mainly of M7C3,the hardness of roller body met requirement.Since setting the intermediate layer between the high Cr cast iron working layer and nodular iron core,it was ensured that the Cr content of the core material was less than 0.5%,and the tensile strength of the nodular iron core material reached 450 MPa and higher.The result of putting the roller into productive application showed that the roller had no quality problem influencing normal production,its wear resistance and anti-failure ability was excellent and therefore,the roller has been approved by the clients.
作者 高玉章
出处 《现代铸铁》 CAS 2013年第6期54-56,共3页 Modern Cast Iron
关键词 高Cr铸铁 离心铸造 轧辊 high Cr cast iron centrifugal casting roller
  • 相关文献

参考文献4

  • 1王久彬,李庆春.高铬铸铁轧辊力学性能[M].北京:国防工业出版社,1995.
  • 2文铁铮,郭玉珍.冶金轧辊技术特性相概论[M].石家庄:河北科学技术出版社,1995.
  • 3殷光虹.现代轧辊材料金相图谱[M].北京:机械工业出版社,1992.
  • 4李具仓,滕涛,赵爱民,王丽娜.高铬铸铁热处理及其性能的研究[J].中国材料科技与设备,2007,4(1):117-119. 被引量:1

共引文献1

同被引文献20

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部