期刊文献+

聚乙二醇改性双马来酰亚胺-三嗪树脂/玻璃纤维布复合材料的热性能 被引量:6

Thermal properties of bismaleimide-triazine/glass fiber composites modified by polyethylene glycol
下载PDF
导出
摘要 聚乙二醇对树脂基玻璃纤维布复合材料增韧具有优良的效果,但其柔性链段的分子结构本质极大影响了复合材料的耐热性能。本文以聚乙二醇为改性剂制备了聚乙二醇/BT树脂/玻璃纤维布复合材料,系统研究了不同分子链长度以及不同含量的聚乙二醇对复合材料热性能的影响。研究结果表明:聚乙二醇的加入降低了复合材料的玻璃化转变温度、5%热失重温度以及800℃残炭率。在聚乙二醇相对分子质量为4000时,复合材料的热性能出现最大值。随聚乙二醇含量的增加,复合材料的热稳定性能逐步下降。由于聚乙二醇、BT树脂、玻璃纤维布之间较大的界面结合力,使基体树脂的链运动受到一定程度的限制,一定程度上缓解了由于聚乙二醇的加入而使复合材料的热稳定性能下降的趋势。研究结果为合理添加聚乙二醇而提高复合材料的韧性提供了热性能方面的参考依据。 It is an effective method that the toughness of polymer-based glass fiber composites is improved by polyethylene glycol(PEG). However,the soft segments of PEG molecular structure have an influence on the thermal properties of composites. In this work,bismaleimide-triazine/glass fiber composites modified by PEG were prepared. The effects of molecular chain length and mounts of PEG on the thermal properties of composites were investigated. The results showed that adding PEG leads to decreases of glass-transition temperature,temperature for the total mass loss of 5%,and the char yield at 800 ℃. There is the highest value of thermal properties,when the molecular weight reaches 4000. Further,the thermal properties of the composites decreased with the increase of PEG amount. The micro-structure analysis showed that the enhanced interface bonding force among PEG,BT resin,and glass fiber are beneficial to the thermal properties,which relaxes the decreased tendency of thermal properties. These results provide a reference for improving the toughness of polymer-based glass fiber using PEG.
出处 《化工进展》 EI CAS CSCD 北大核心 2014年第1期150-154,共5页 Chemical Industry and Engineering Progress
基金 国家科技重大专项(2011ZX02709-001) 广东省引进创新科研团队计划(2011D052)项目
关键词 复合材料 电子材料 聚合物 热力学性质 composites electronic materials polymers thermodynamics properties
  • 相关文献

参考文献18

  • 1祝大同.对发展IC封装载板用覆铜板的探讨[上][J].覆铜板资讯,2011(4):10-15. 被引量:5
  • 2Yan Hongqiang,Cheng Jie,Fang Zhengping. Properties of the glass fibre/interpenetrating polymer network composites based on novel naphthalene-contained bismaleimide and cyanate resin[J].International Journal of Materials&Product Technology,2011,(3-4):156-164.
  • 3He Shaobo,Liang Guozheng,Yan Hongxia. Thermal and mechanical evaluation of cyanate ester resin modified with bismaleimide and diallyl phthalate[J].{H}Polymers for Advanced Technologies,2010,(9):640-645.
  • 4曾小亮,于淑会,孙蓉,杜如虚.烯丙基双酚A改性双马来酰亚胺-三嗪树脂的热性能[J].化工进展,2011,30(5):1050-1053. 被引量:3
  • 5Wu Guanglei,Kou Kaichang,Chao Min. Preparation and characterization of bismaleimide-triazine/epoxy interpenetrating polymer networks[J].{H}Thermochimica Acta,2012.44-50.
  • 6尹剑波,梁国正.共聚改性氰酸酯树脂及其性能[J].塑料工业,2001,29(1):36-38. 被引量:25
  • 7刘辉,王耀先,程树军.聚苯醚改性双马来酰亚胺三嗪树脂及其复合材料性能研究[J].塑料工业,2009,37(2):7-10. 被引量:12
  • 8Hu Jiangtao,Gu Aijuan,Jiang Zhijun. High efficiency synthesis of octavinylsilsesquioxanes and its high performance hybrids based on bismaleimide-triazine resin[J].{H}Polymers for Advanced Technologies,2012,(8):1219-1228.
  • 9Guan Qingbao,Gu Aijuan,Liang Guozheng. Curing kinetics and mechanism of novel high performance hyperbranched polysiloxane/bismaleimide/cyanate ester resins for resin transfer molding[J].{H}Journal of Applied Polymer Science,2011,(1):304-312.
  • 10Zhou Cheng,Gu Aijuan,Liang Guozheng. Novel toughened cyanate ester resin with good dielectric properties and thermal stability by copolymerizing with hyperbranched polysiloxane and epoxy resin[J].{H}Polymers for Advanced Technologies,2011,(5):710-717.

二级参考文献87

共引文献69

同被引文献72

引证文献6

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部