降低对环境影响,德国研发新型发泡剂
摘要
据了解,德国亚琛工业大学塑料加工研究院研发出一种新型的聚氨酯发泡技术。该技术以二氧化碳为发泡剂,替代常规化学品发泡剂的同时,降低了对环境的影响。
出处
《工程塑料应用》
CAS
CSCD
北大核心
2014年第1期97-97,共1页
Engineering Plastics Application
参考文献15
-
1Bakoglu H B. Circuits, Interconnections, and Packaging for VLSI. Addison Wesley, 1990, pp.283-303.
-
2Gao T, Liu C L. Minimum crosstalk channel routing. In Proc. Int. Conf. Computer-Aided Design, Santa Clara, CA,November 1993, pp.692-696.
-
3Gao T, Liu C L. Minimum crosstalk switchbox routing. In Proc. Int. Conf. Computer-Aided Design, San Jose, CA,November 1994, pp.610-615.
-
4Zhou H, Wong D F. An optimal algorithm for river routing with crosstalk constraints. In Proc. Int. Conf. ComputerAided Design, San Jose, CA, 1996, pp.310-315.
-
5Kastner R, Bozorgzadeh E, Sarrafzadeh M. An exact algorithm for coupling-free routing. In Proc. Int. Symp. Physical Design, Sonoma, CA, USA, April 2001, pp.10-15.
-
6Batterywala S H, Shenoy N, Nicholls W, Zhou H. Track assignment: A desirable intermediate step between global routing and detailed routing. IEEE Int. Conf. Computer Aided Design, San Jose, CA, 2002, pp.59-66.
-
7Tseng H P, Scheffer L, Sechen C. Timing and crosstalk driven area routing. In Proc. 35th ACM/IEEE Design Automation Conf., Moscone Center, San Francico, CA, USA, June 1998,pp.378-381.
-
8Chang C C, Cong J. Pseudo pin assignment with crosstalk noise control. In Proc. Int. Symp. Physical Design, San Diego, CA, USA, 2000, pp.41-47.
-
9Yao H L, Zhou Q, Hong X L, Cai Y C. Cross point assignment algorithm with crosstalk constraint. Chinese Journal of Semiconductors, 2004, 25(4): 388-393.
-
10Xue T, Kuh E S. Post global routing crosstalk synthesis.TCAD, December 1997, pp.1418-1430.
-
1降低环境影响 德国研发新型发泡剂[J].塑料助剂,2014(1):50-50.
-
2Lilli Manolis Sherman.聚氨酯发泡技术的最新进展[J].现代塑料,2007(5):88-88.
-
3张骥红.现场聚氨酯发泡技术用于缓冲包装[J].聚氨酯信息,2002(10):11-11.
-
4德国亚琛大学研发新型聚氨酯发泡工艺[J].聚氨酯工业,2013,28(6):37-37.
-
5朱俊.聚氨酯发泡技术应用及发展趋势[J].化学工业,2013,31(5):36-39. 被引量:11
-
6海信与巴斯夫联合开发低密度发泡技术[J].塑料科技,2013,41(1):41-41.
-
7以HCFC-1416为发泡剂的聚氨酯组合料[J].试剂与精细化学品,2007(6):18-18.
-
8德国亚琛大学研发新型聚氨酯发泡工艺[J].热固性树脂,2014,29(3):4-4.
-
9郭智臣.德国亚琛大学研发新型聚氨酯发泡工艺[J].化学推进剂与高分子材料,2014,12(1):22-22. 被引量:1
-
10Matthew H. Naitove.不断进步的PUR加工技术[J].现代塑料,2008(9):50-53.