期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

相容剂对氯化丁基橡胶/锦纶12共混体系结构和性能的影响

Influence of Compatibilizer on Structure and Properties of CIIR/PA12 Blend
下载PDF
导出
摘要 分别以聚丙烯接枝马来酸酐(PP-g-MAH)和氯化聚乙烯(CPE)为相容剂,研究相容剂种类和用量对氯化丁基橡胶(CIIR)/锦纶(PA)12共混体系微观结构、物理性能和热力学性能的影响。结果表明:与CPE相比,PP-g-MAH对CIIR/PA12共混体系的增容效果较为显著,且当PP-g-MAH用量为10份时,CIIR/PA12共混体系的相态结构和综合物理性能达到最佳。 The influence of compatibilizers on the structure and properties of CIIR/PA12 blend was investigated in this paper. The compatibilizers were polypropylene grafted maleic anhydride （PP-g- MAH） and chlorinated polyethylene （CPE）. Compared with CPE,PP-g-MAH showed better compati- bilization effect on CIIR/PA12 blend,and the optimum addition level of PP-g-MAH was 10 phr.
作者 张建 田洪池 王兰 伍社毛 田明 张立群
机构地区 北京化工大学有机无机复合材料国家重点实验室
出处 《橡胶工业》 CAS 北大核心 2014年第1期22-26,共5页 China Rubber Industry
关键词 氯化丁基橡胶 锦纶12 相容剂 聚丙烯接枝马来酸酐 氯化聚乙烯 CIIR PAl 2 compatibilizer PP-g-MAH CPE
分类号 TQ330.1 [化学工程—橡胶工业]
  • 相关文献

参考文献6

  • 1史莎莎,伍社毛,张立群.增容剂对动态硫化氯化丁基橡胶/尼龙12热塑性弹性体性能的影响[J].合成橡胶工业,2011,34(6):446-450. 被引量：11
  • 2周应学,胡国胜,李迎春.PP-g-MAH和SMAH增容PP/PA11的研究[J].工程塑料应用,2004,32(5):17-20. 被引量：6
  • 3Yu D M,Wu J S,Zhou L M. The Dielectric and Mechanical Properties of a Potassium-Titanate-Whisker-reinforced PP/PA Blend[J].{H}Composites Science and Technology,2000,(04):499-508.
  • 4Van Dyke J D(Jack),Gnatowski Marek,Koutsandreas Andy. Chemical Interaction in Blends of Polyamide and Butyl Rubbers[J].{H}Journal of Applied Polymer Science,2003,(04):980-991.doi:10.1002/app.12232.
  • 5Yoshihihiro Soeda,Naoyuki Morooka,Yuichi Hara. Laminate or Thermoplastic Polymer Composition Having Low Air Permeability and Pneumatic Tire Using Same as Inner Liner[P].EUR.:ESP WO2007081323(A1),2007.
  • 6Goto S I,Kimura K,Yamamoto T. A Novel Gas-barrier Elastomer Composed of Butyl Rubber and Polyamide[J].{H}Journal of Applied Polymer Science,1999,(14):3548-3552.doi:10.1002/(SICI)1097-4628(19991227)74:14<3548::AID-APP31>3.0.CO;2-I.

二级参考文献14

  • 1保罗,巴克纳尔.聚合物共混物:组成与性能(上卷)[M]北京:科学出版社,2000:390-416.
  • 2Goto S I, Kenzo K, Yamamoto T, et aL A novel gas-barrier elastomer composed of butyl rubber and polyamidc [ J ].Journal of Applied Polymer Science, 1999,74:3548 - 3552.
  • 3van Dyke J D, Gnatowski M, Koutsandreas A, et al. Chemical interactioo in blends of polyamide and butyl rubbers [ J]. Jour- nal of Applied Polymer Science,2003,89 : 980 - 991.
  • 4Tucker D J,Lee S,Einsporn R L.A study of the effect of PP-g-MA and SEBS-g-MA on the mechanical and morphological properties of polypropylene／nylon 6 blends.Polym Eng Sci,2000,40(2):2 577.
  • 5Dean B D. Blends of impact modified styrene/maleic anhydride copolymers with nylon 11 and nylon 12. Journal of Elastomers and Plastics, 1985,17 ( 1 ) :55.
  • 6Duvall J, SeUittl C, Myers C, et al. Effect of Compatibilization on the Properties of Polypropylene/Polyamide-66 (75/25Wt) Blends. J Appl Polym Sci, 1994,52 : 195.
  • 7Tao Tang, Huang Baotong. Crystallization effect on morphology of PP/PA12 blends. Polymer, 1995,36:5061.
  • 8Li Qifang, Dong Gil Kim, Wu Dezhen, et al. Effect of maleic anhydride draft ratio on mechanical properties and morphology of nylonll/ethylene-octene copolymer blends. Polym Engin Sci,2001,14(12) :2155.
  • 9Josch J,Malhaupt R.Deformation behavior of polypropylene／polyamide blends.J Appl Polym Sci,1995,56(4):1 607.
  • 10Godshall D,White C,Wilkes G L.Effect of compatibilizer molecular weight and maleic anhydride content on interfacial adhesion of poly.propylenePA 6 bicomponent fibers.J Appl Polym Sci,2001,80(2):130.

共引文献15

橡胶工业
2014年 第1期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部