期刊文献+

循环水管道双金属温度计保护套管断裂原因分析 被引量:2

CAUSE ANALYSIS ON THE FRACTURE OF THE BIMETAL THERMOMETER PROTECTION SLEEVE ON CIRCULATING WATER PIPE
下载PDF
导出
摘要 某循环水管道双金属温度计保护套管短期使用后即发生了断裂,通过宏观、断口检测及计算等方法进行断裂原因分析,结果表明保护套管断裂主要原因是由于管道中两相流的作用,引起套管共振,产生超高周疲劳断裂,并提出了套管安装使用的建议。 After having been used for a short period,fracture occurred on the protection sleeve of bimetal thermometer of a circulating water line.Through analyzing the fracture by macro,fracture surface test and calculation,it is found out that the fracture was mainly caused by the effect of two-phase flow in the line which led to sleeve resonance and consequently,ultra-high cycle fatigue fracture occurred.This paper then puts forward some suggestions for installation and use of the sleeve.
出处 《石油化工设备技术》 CAS 2013年第5期64-66,9,共3页 Petrochemical Equipment Technology
关键词 温度计保护套管 两相流 共振 超高周疲劳 Thermometer protection sleeve Two-phase flow Resonance Ultra-high cycle fatigue
  • 相关文献

参考文献4

  • 1林宗虎,李永光.气液两相流旋涡脱落特性及工程应用(第一版)[M].北京:化学工业出版社.2001:8-74.
  • 2ASME PTC 19.3--2004, Instruments and Appara- tus Parts 3-Temperature Measurement[S].
  • 3中国石化集团上海工程有限公司.化工工艺设计手册下册(第四版)[M].北京:化学工业出版社,2009:60-62.
  • 4顾玉丽,陶春虎,何玉怀,胡春燕,滕旭东.金属材料超高周疲劳失效的基本特征[J].失效分析与预防,2011,6(3):193-198. 被引量:9

二级参考文献22

  • 1Morrissey R J, Golden P J. Fatigue Strength of a Single Crystal in the Gigacycle Regime [ J ]. International Journal of Fatigue, 2007,29(9 - 11 ) :2079 -2084.
  • 2Stanzl S. A New Experimental Method for Measuring Life Timeand Crack Growth of Materials under Multi-stage and Random Loadings [ J ]. Ultrasonics, 1981,19 ( 6 ) :269 - 272.
  • 3Tien J K, Gamble R P. The Room Temperature Fatigue Behavior of Nickel-based Superalloy Crystals at Ultrasonic Frequency [ J ]. Metall Trans A, 1971:1933 -1938.
  • 4Akiniwa Y, Stanzl-Tschegg S, Mayer H, et al. Fatigue Strength of Spring Steel under Axial and Torsional Loading in The Very High Cycle Regime[J]. International Journal of Fatigue, 2008, 30(12) :2057 -2063.
  • 5Sohar C R, Betzwar-Kotas A, Gierl C, et al. Gigacycle Fatigue Behavior of a High Chromium Alloyed Cold Work Tool Steel[ J]. International JournM of Fatigue, 2008,30 (7) : 1137 - 1149.
  • 6Harlow D G, Wei R P. Sakai T, et al. Grack Growth Based Probability Modeling of S-N Response for High Strength Steel[ J]. International Journal of Fatigue, 2006,28 ( 11 ) : 1479 - 1485.
  • 7Natio T, Uedo H, Kikuchi M. Fatigue Behavior of Carburized Steel with Internal Oxides and Nonmartensitic Microstructure Near the Surface [ J ]. Metallurgical and Materials Transactions A, 1984, 15(7) :1431 - 1436.
  • 8Chapetti M D,Tagawa T, Miyata T. Ultra-long Cycle Fatigue of High-Strength Carbon Steels Part I : Review and Analysis of The Mechanism of Failure [ J ]. Materials Science & Engineering A, 2003,15 (7) :227 - 235.
  • 9Zhang J M, Li S X, Yang Z G, et al. Influence of Inclusion Size on Fatigue Behavior of High Strength Steels in The Gigacycle Fatigue Regime [ J ]. International Joumal of Fatigue,2007,29 ( 4 ) : 765 - 771.
  • 10Mayer H. Ultrasonic Torsion and Tension-compression Fatigue Testing: Measuring Principles and Investigations on 2024-3351 A- luminium Alloy [ J ]. International Journal of Fatigue, 2006,28 ( 11 ) :1446 - 1455.

共引文献9

同被引文献5

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部