期刊文献+

吸附法脱除液化石油气中的二甲基二硫醚 被引量:4

Removal of dimethyl disulfide from LPG by adsorption method
下载PDF
导出
摘要 采用等体积浸渍法制备了CuY和CuX分子筛吸附剂,在固定床中考察了分子筛吸附剂种类、吸附温度、原料空速和再生次数对脱除液化石油气中的二甲基二硫醚效果的影响。实验结果表明,CuY和CuX分子筛吸附剂保持了原有的骨架结构;CuY分子筛吸附剂可作为脱除液化石油气中二甲基二硫醚的吸附剂;在温度为25℃,压力为0.6 MPa,空速为1 h-1时,CuY分子筛吸附剂的穿透硫容为1.02%;吸附剂具有较好的再生性能。 CuY and CuX zeolite adsorbents are prepared by incipient impregnation. The effect of zeolite adsorbents type, adsorbent temperature, feedstock LHSV and regeneration frequencies on the result of the removal of dimetbyl disulfide from LPG are investigated in a fixde-hed reactor. The results show that CuY and CuX zeolite adsorbents maintain the original skeleton construction. CuY zeolite adsorbent can be used to remove the dimethyl disulfide from LPG. The breakthrough of sulfur capacity for CuY zeolite adsorbent is 1.02% under conditions of 25℃ ,0. 6 MPa and 1 h- i of LHSV. The adsorbent shows good regeneration performance.
出处 《现代化工》 CAS CSCD 北大核心 2014年第1期72-74,共3页 Modern Chemical Industry
关键词 吸附法 CuY分子筛吸附剂 二甲基二硫醚 液化石油气 adsorption method CuY zeolite adsorbents dimethyl disulfide LPG
  • 相关文献

参考文献7

  • 1刘金玉,李东,李吉春,程亮亮.C_4馏分工业应用技术研究进展[J].石化技术与应用,2007,25(2):176-180. 被引量:29
  • 2Bolt H V, Glanz S. Increase propylene yields cost effectively[ J ]. Hy- drocarbon Process ,2002 ( 12 ) :77 - 80.
  • 3周广林,王晓胜.分子筛基液化石油气精脱硫吸附剂的制备与评价[J].石油化工,2013,42(3):286-291. 被引量:10
  • 4刘成军,温世昌,王玮瑶,潘万群.降低MTBE产品硫含量的探讨[J].炼油技术与工程,2011,41(12):14-18. 被引量:20
  • 5Hidenobu W, Yuko T, Masato H. Removal of dimethyi sulfide and t- butylmercaptan from city gas by adsorption on zeolites [ J ]. Micro- porous and Mesoporous Materials, 2001,46 ( 2/3 ) : 237 - 247.
  • 6Meyer P,Thomas M. Process of removal of sulphur compounds from hydrocarbon streams using adsorbents: EP, 1700630 [ P ]. 2006 - 09 - 03.
  • 7Kikkawa Y, Nozawa N,Inoue H,et al. Method for removal of sulfur- containing compound from natural gas: WO, 2007007571 [ P ]. 2007 -01 - 18.

二级参考文献50

共引文献56

同被引文献60

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部