期刊文献+

Influence of chemical composition and cold deformation on aging precipitation behavior of high nitrogen austenitic stainless steels 被引量:1

Influence of chemical composition and cold deformation on aging precipitation behavior of high nitrogen austenitic stainless steels
下载PDF
导出
摘要 The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-1.1N(HNS-A), 18Cr-16Mn-1.3N(HNS-B), 18Cr-18Mn-2Mo-0.96N(HNS-C) and 18Cr-18Mn-2Mo-0.77N(HNS-D) high nitrogen austenitic stainless steels was investigated. The results show that the "nose" temperatures and incubation periods of the initial time temperature precipitation(TTP) curves of aged HNSs are found to be 850℃,60s; 850℃, 45s; 850℃, 60 s and 900℃,90s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The χ phase corresponding to a composition of Fe36Cr12Mo10, is determined to be a body-centered cubic structure of a=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously. The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) high nitrogen austenitic stainless steels was investigated. The results show that the "nose" temperatures and incubation periods of the initial time-temperature-precipitation (TTP) curves of aged HNSs are found to be 850 ℃, 60 s; 850 ℃, 45 s; 850 ℃, 60 s and 900 ℃, 90 s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The Z phase corresponding to a composition of Fe36Cr^2Mo10, is determined to be a body-centered cubic structure ofa=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously.
出处 《Journal of Central South University》 SCIE EI CAS 2013年第12期3354-3362,共9页 中南大学学报(英文版)
基金 Project(51304041) supported by the National Natural Science Foundation of China Project(N100402015) supported by Fundamental Research Funds for the Central Universities of China Project(2012AA03A502) supported by the National High Technology Research and Development Program of China Project supported by Program for Liaoning Innovative Research Team in University,China
关键词 高氮奥氏体不锈钢 析出行为 化学成分 时效析出 冷变形 TTP曲线 16MN钢 体心立方结构 high nitrogen austenitic stainless steel aging precipitation time-temperature-precipitation curve chemical composition cold deformation
  • 相关文献

参考文献5

二级参考文献37

  • 1陆利明,李宏,壮云乾,蒋国昌,徐匡迪.氮气加压熔炼高氮钢若干理论问题探讨[J].钢铁研究学报,1996,8(1):6-10. 被引量:11
  • 2TURNBULL A.Modeling of environment assisted cracking[J].Corrosion Science,1993,34(6):921-960.
  • 3LEBAN M,BAJTZ,LEGAT A.Detection and differentiation between cracking processes based on electrochemical and mechanical measurements[J].Electrochimica Acta,2004,49(17/18):2795-2801.
  • 4GIRIJA S,KAMACHI-MUDALI U,RAJU V R,DAYAL R K,KHATAK H S,RAJ B.Determination of corrosion types for AISI type 304L stainless steel using electrochemical noise method[J].Materials Science and Engineering A,2005,407(1/2):188-195.
  • 5AL-MAZEEDI H A A,COTTIS R A.A practical evaluation of electrochemical noise parameters as indicators of corrosion type[J].Electrochimica Acta,2004,49(17/18):2787-2793.
  • 6ZHANG T,SHAO Y,MENG G,WANG F H.Electrochemical noise analysis of the corrosion of AZ91D magnesium alloy in alkaline chloride solution[J].Electrochimica Acta,2007,53(2):561-568.
  • 7KOVAˇC J,LEBAN M,LEGAT A.Detection of SCC on prestressing steel wire by the simultaneous use of electrochemical noise and acoustic emission measurements[J].Electrochimica Acta,2007,57(27):7607-7616.
  • 8DURAN M G,MACDONALD D D.Stress corrosion cracking of sensitized type 304 stainless steel in thiosulphate solution (Ⅱ):Dynamics of fracture[J].Corrosion Science,2006,48(7):1608-1622.
  • 9KIM S W,KIM H P.Electrochemical noise analysis of PbSCC of alloy 600 SG tube in caustic environments at high temperature[J].Corrosion Science,2009,51(1):191-196.
  • 10ARGANIS-JUAREZ C R,MALO J M,URUCHURTU I.Electrochemical noise measurements of stainless steel in high temperature waters[J].Nuclear Engineering and Design,2007,237(24):2283-2291.

共引文献66

同被引文献7

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部