期刊文献+

轮式装载机横梁与摇臂干涉问题的可视化解决方案 被引量:2

Visualized Approaches to Interference between the Boomand the Cross beam of a Wheeled Loader
下载PDF
导出
摘要 轮式装载机的横梁是工作装置连杆机构与动臂间的重要连接构件 ,但在工作装置设计时 ,时常发生横梁与摇臂的干涉现象。以 ZL 5 0型装载机为例 ,利用 CAD和可视化技术 ,确定了干涉区域的位置与最大干涉量 ,并提出了解决干涉问题的 2种实用方案 ,成功地解决了设计中遇到的技术难题。 A cross beam is an important link member, which is a link between the working device Z bar linkage and the boom of a wheeled loader. The moving relationship of the linkage is so complicated that the interference between the boom and the cross beam is often occurred during the manual design of the working device. Using CAD and visualization techniques, this paper took a ZL50 wheeled loader as an example, the interference zone and the maximum value of the interference were determined automatically, and two practical methods for solving the interference were presented. One method is to modify the dimension of the cross beam, and the other is to modify the dimension of the rocker arm. The two methods are all of available. As the former method has the advantage over the latter one, it is finally adopted in practice.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2001年第1期31-33,共3页 Transactions of the Chinese Society for Agricultural Machinery
基金 国家自然科学基金资助项目 !(项目编号 :5 970 5 0 10 ) 教育部优秀青年骨干教师资助项目
关键词 轮式装载机 可视化 工作装置 干涉问题 Wheeled loader, Interference, Visualization
  • 相关文献

参考文献3

二级参考文献4

同被引文献12

  • 1Filla R,Palmberg J O.Using dynamic simulation in the development of construction machinery[C]//The Eighth Scandinavian International Conference on Fluid Power.Tampere,Finland:The Press of Link? ping University,2003:651 -667.
  • 2Grant P J,Freeman J S,Vail R,et al.Preparation of a virtual proving ground for construction equipment simulation[C]//ASME Design Engineering Technical Conferences.Atlanta,USA:ASME Press,1998:1-11.
  • 3Buzdugan L I,Balling O,Chien P.Multirate integration for real-time simulation of wheel loader hydraulics[C]//ASME Design Engineering Technical Conferences.Las Vegas,USA:ASME Press,1999:1-15.
  • 4Reno Filla,Allan Ericsson,Jan-Ove Palmberg.Dynamic simulation of construction machinery:Towards an operator model[C]//International Fluid Power Exhibition Technical Conference.Las Vegas,USA:The Press of National Fluid Power Association,2005:429-438.
  • 5Larsson J.Concepts for multi-domain simulation with application to construction machinery[D].Link? ping,Sweden:Link?ping University,2001:1-87.
  • 6Filla R.Operator and machine models for dynamic simulation of construction machinery[D].Link? ping,Sweden:Link? ping University,2005:27-39.
  • 7Blouin S,Hemami A,Lipsett M.Review of resistive force models for earthmoving processes[J].ASCE Journal of Aerospace Engineering,2001,14(3):102-111.
  • 8吕佩学.轮式装载机工作装置CAD设计计算(辅助设计).吉林大学学报,2000,:5-11.
  • 9王国彪,阎满红,杨力夫,马铸.装载机铲斗结构参数优化设计及其可视化[J].北京科技大学学报,1999,21(1):51-53. 被引量:4
  • 10于硕,闫涵.装载机工作装置的机构分析[J].工程机械,2001,32(8):25-27. 被引量:28

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部