摘要
以某数控机床研究所研发的VMC850F五轴联动机床为例,通过坐标系统间的变换关系,推导出了刀轴矢量及刀位点运动换模型,对该模型方程进行了求解。根据此算法开发了后置处理器,通过在VMC850F机床上加工叶轮样件得到了验证,为五轴后置处理器的开发提供了参考。
Taking VMC850F five-axis linkage machine manufactured by some research institute of CNC machine as an example, the transformational model for the cutter location vector and its points was deduced based on conversion connection of coordinate sys-tems,and then the model equations were solved. According to the arithmetic,a post processing software was developed,which was verified by a impeller model process on VMC850F machine. It provides reference for five-axis post-processor development.
出处
《机床与液压》
北大核心
2014年第3期35-37,共3页
Machine Tool & Hydraulics
基金
柳州市机械及机电一体化产业关键技术攻关项目(2011C030107)
关键词
五轴联动机床
坐标变换
后置处理
Five-axis linkage machine
Conversion of coordinate
Post processor
