期刊文献+

波长切换高效液相色谱法同时测定化胃舒颗粒中4种有效成分的含量 被引量:2

Simultaneous Content Determination of Four Kinds of Effective Constituent in Huaweishu Granules by Wavelength Switching-HPLC
下载PDF
导出
摘要 目的 建立同时测定化胃舒颗粒中毛蕊异黄酮苷、阿魏酸、甘草苷和橙皮苷4种成分含量的反相高效液相色谱法.方法 采用Synergi C18柱(250 mm×4.6 mm,4μm),以乙腈-0.05%磷酸水溶液(体积分数)为流动相进行梯度洗脱,流速为1.0 mL/min,柱温为30℃.采用切换波长的方法,在260 nm下检测毛蕊异黄酮苷,在316 nm下检测阿魏酸,在237 nm下检测甘草苷,在280 nm下检测橙皮苷.结果 毛蕊苷异黄酮苷、甘草苷、阿魏酸和橙皮苷的进样量分别在0.087 5 ~0.437 8 μg(r=1,n=5),0.085 45 ~0.427 3 μg(r=0.9998,n=5),0.081 6 ~0.408 μg(r =0.999 9,n=5)和0.123 5 ~0.618μg(r=0.999 8,n=5)范围内与峰面积呈良好的线性关系,平均加样回收率依次为96.84%,98.04%,97.35%和98.10%,RSD分别为0.98%,1.28%,1.31%和1.05%.结论 该方法可同时测定化胃舒颗粒中毛蕊苷异黄酮苷、甘草苷、阿魏酸和橙皮苷的含量. Objective To develop a RP-HPLC method for the content determination of calycosin-7-glucoside,liquiritin,ferulic acid and hesperidin in Huaweishu Granules.Methods HPLC was performed on the Synergi C18 column(250mm×4.6 mm,4μm) with the gradient elution of acetonitrile-0.05% phosphoric acid aqueous solution at a flow rate of 1.0 mL/min.The column temperature was maintained at 30 ℃.The wavelength switching method was adopted for conducting the detection at 260 nm for calycosin-7-glucoside,at 237 nm for liquiritin,at 316 nm for ferulic acid and at 280 nm for hesperidin.Results The linear ranges were 0.087 5-0.437 8 μg(r=1,n=5),0.085 45-0.427 3 μg(r=0.999 8,n=5),0.0816-0.408 μg(r=0.999 9,n=5) and 0.123 5-0.618 μg(r=0.999 8,n=5),respectively.The recovery rates were 96.84% (RSD=0.98%),98.04% (RSD=1.28%),97.35% (RSD=1.31%)and 98.10% (RSD =1.05%),respectively.Conclusion This method can simultaneously determine the contents of calycosin-7-glucoside,liquiritin,ferulic acid and hesperidin in Huaweishu Granule.
出处 《中国药业》 CAS 2014年第4期35-37,共3页 China Pharmaceuticals
基金 国家科技部重大新药创制项目 项目编号:2010ZX09102-212
关键词 化胃舒颗粒 毛蕊异黄酮苷 甘草苷 阿魏酸 橙皮苷 波长切换法 高效液相色谱法 Huaweishu Granules calycosin-7-glucoside liquiritin ferulic acid hesperidin wavelength shifter HPLC
  • 相关文献

参考文献4

二级参考文献19

共引文献20

同被引文献19

引证文献2

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部