期刊文献+

环氧/多巯基型无色透明胶粘剂的研制 被引量:8

Preparation of epoxy/polythiol colourless transparent adhesive
下载PDF
导出
摘要 采用自制多巯基固化剂与E-51环氧树脂制备了一种环氧/多巯基型无色透明胶粘剂,对其拉伸剪切强度、黏度、紫外-可见光透过率等性能进行了研究,并在相同条件下与使用进口固化剂的胶粘剂性能进行了对比。结果表明,随着固化温度升高,2种胶粘剂拉伸剪切强度均不断提高,在固化温度达到110℃时拉伸剪切强度均达到最大,随后开始下降。随温度升高,2种胶粘剂黏度均不断下降。紫外-可见光透过率的测试表明,固化温度对进口胶粘剂的透明度影响很大,80℃透过率就明显下降。固化温度在80℃内,自制胶粘剂的紫外-可见光透过率变化不大。在此环氧体系中,使用自制固化剂的胶粘剂在耐温性方面具有一定优势。 A kind of transparent epoxy adhesive was prepared with multi-thiol curing agent and E-51epoxy resin. The tensile shear strength, viscosity and UV-Vis light Transmission Performance was investigated,comparing with the imported one. The result shows that both adhesives reach their highest tensile shear strength at 110℃,but the imported one' s UV-Vis light Transmission decreased obviously. So the adhesive we prepared has the advantage on the temperature- stable ability.
出处 《粘接》 CAS 2014年第1期36-39,共4页 Adhesion
关键词 多巯基环氧胶粘剂 拉伸剪切强度 紫外一可见光透过率 polythiol epoxy adhesive tensile shear strength UV-Vis light transmission
  • 相关文献

参考文献11

二级参考文献108

共引文献68

同被引文献52

引证文献8

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部