摘要
根据GB/T 20216—2006标准测定了废纸制浆过程的不同工段旧报纸(ONP)浆样和混合办公废纸(MOW)浆样的有效残余油墨浓度(ERIC),用Matlab软件对测量原理公式进行了分析,发现当试样的不透明度超过97%时,曲面出现了突变,此时应对光散射系数S的计算公式进行修正:S=1000αw。对于ONP浆,α值取3.01,对于MOW浆,α值取3.82,再结合试样定量,计算出ERIC,该修正方法能降低系统误差。
The values of effective residual ink concentration （ERIC） of deinked ONP pulps and MOW pulps from different deinking stages were measured,the formula of its measuring principle was analyzed with Matlab software,results showed that,the surface appeared saltation when the opacity of the pulp sample exceeded 97％ so scattering coefficient S in the formula was amended as follows,S=1000α/w.The values of α were 3.01 for ONP pulp and 3.82 for MOW pulp.The effective residual ink concentration could be calculated combining the basis weight of the sample,this method could reduce the system error.
出处
《中国造纸》
CAS
北大核心
2014年第2期21-24,共4页
China Pulp & Paper
基金
中华人民共和国工业和信息化部<废纸浆脱墨效果评价>行业标准计划(2012-0277T-QB)
