期刊文献+

底水油藏水平井中心管、ICD完井工艺技术 被引量:8

Pipe Base and ICD Completion Technique of the Horizontal Wells in the Bottom Water Reservoir
下载PDF
导出
摘要 西江X-1油田是典型的底水油藏,具有厚底水、薄油层的特点.采用常规水平井开发时。由于流动摩阻和地层非均质性的影响,存在较严重的底水锥进问题,含水率上升过快,开发效果较差。中心管、ICD完井工艺是一种水平井控锥技术,由于其独特的内部结构,能使水平井的供液剖面趋于均衡,从而有效改善底水油藏的水驱效果。为了改善底水油藏的开发效果,对中心管、ICD完井工艺技术进行油藏模拟研究,结果表明,在底水油藏中,中心管、ICD技术的开发效果明显优于常规水平井,单井平均增油2×10^4~4×10^5m^3。在西江X-1油田范围内进行推广应用.收到了理想的开发效果,实现了底水油藏的成功开发。西江X-1油田的开发实践表明,中心管、ICD完井工艺技术有明显的控锥作用,能有效改善底水油藏的开发效果,也为同类油藏的开发积累了宝贵经验。 Xijiang X-1 oilfield is a typical bottom water reservoir with thick bottom water and thin oil reservoirs.Influenced by flow friction and formation heterogeneity,the problem of bottom water coning is very severe during the development with standard horizontal wells.As the well water cut ascended rapidly,the early stage development of Xijiang X-1 oiltield was disappointing.Pipe base and ICD completion technique are a kind of the one for water coning control of the horizontal well ,which can improve the water flood effect in the bottom water reservoir through balanced fluid production profile of the horizontal well for its special internal structure.For the sake of lessening the bottom water fingering,we made the reservoir simulation.The resuits show that the production effect of the pipe base and ICD technique could be greatly improved in the bottom water reservoir development.Compared with the conventional horizontal wells,the ICD technique could produce 2×10^4~4×10^5m^3 extra oil for single well.According to the analysis and reservoir simulation results,the pipe base and ICD completion technique has been completely introduced in the overall oilfield.Based on the application of the pipe base and ICD,the final development of Xijiang X-1 oilfield was very successful.The practice of Xijiang X-1 oilfield proves that the pipe base and ICD completion technique could greatly re- duce the speed of bottom water coning and improve the development of bottom water reservoir.The successful application case of the pipe base and ICD completion in Xijiang X-1 oilfield also provided a development experience of the bottom water reservoir for the similar reservoir development.
出处 《中外能源》 CAS 2014年第2期40-43,共4页 Sino-Global Energy
关键词 西江X-1油田 底水油藏 水平井 控锥技术 完井工艺 中心管 ICD Xijiang X-1 oilfield bottom water reservoir horizontal wells water coning control completion technique pipe base ICD technique
  • 相关文献

参考文献2

二级参考文献13

  • 1王小秋,汪志明,魏建光.井筒与油藏耦合条件下水平井变质量流动规律研究[J].水动力学研究与进展(A辑),2005,20(3):326-331. 被引量:32
  • 2薛亮,汪志明,王小秋.注入比对水平井筒压降影响规律的研究[J].中国石油大学学报(自然科学版),2006,30(4):71-74. 被引量:2
  • 3DIKKEN B J. Pressure drop in horizontal wells and its effect on their production performance [ R]. SPE 19824, 1989.
  • 4LANDMAN M J, GOLDTHORPE W H. Optimization of perforation distribution for horizontal wells [ R ]. SPE 23005,1991.
  • 5ASHEIM H, OUDEMAN P. Determination of perforation schemes to control production and injection profiles along horizontal wells[ R]. SPE 29275,1995.
  • 6BREKKE K , LIEN S C. New and simple completion methods for horizontal wells improve the production performance in high permeability, thin oil zones [ R ]. SPE 24762,1992.
  • 7PERMADI P, WIBOWO W, ALAMSYAH Y, et al. Horizontal well completion with stringer for reducing water coning problems[ R]. SPE 37464,1997.
  • 8SINHA S, KUMAR R, VEGA L, et al. Flow equilibration towards horizontal wells using downhole valves [ R ]. SPE 68635,2001.
  • 9JANSEN J D, WAGENVOORT A M, DALING R. Smart well solutions for thin oil rims: inflow switching and the smart stinger completion [ R ]. SPE 77942, 2002.
  • 10JANSEN J D. A semianalytical model for calculating pressure drop along horizontal wells with stinger completions [ J ]. SPE Journal, 2003,8 (2) : 138-146.

共引文献8

同被引文献51

引证文献8

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部