期刊文献+

双螺旋折流板换热器最佳螺旋角的研究 被引量:1

Research on the optimization helix angle of double-helical baffles heat exchangers
下载PDF
导出
摘要 为了研究换热器的传热性能与双螺旋折流板换热器的螺旋角的关系,通过建立多个不同螺旋角的管壳式换热器模型,运用数值计算的技术手段对其进行模拟,并对其数值模拟结果进行对比分析.结果表明:双螺旋折流板换热器存在最佳螺旋角使得换热器的换热性能最优.相同换热器结构的条件下,壳程进口流量对双螺旋折流板换热器的最佳螺旋角没有影响.随着壳径的增大,双螺旋折流板式换热器的最佳螺旋角有下降趋势. To investigate the relationships between the heat transfer coefficient and baffle helix angle of double -helical baffles heat exchanger , the physical and mathematical model of double-helical baffles heat exchanger with different baffles helix angle were developed .The results show that the optimization baffles helix angle results in the highest heat transfer coefficient of double-helical baffles heat exchanger;the inlet flow flux of shell side has no effect on the optimization baffles helix angle for those heat exchanger with the same heat transfer structure . The optimization baffles helix angle tends to decrease with the tube diameter increment of double -helical baffles heat exchanger .
出处 《江苏科技大学学报(自然科学版)》 CAS 2013年第6期551-555,共5页 Journal of Jiangsu University of Science and Technology:Natural Science Edition
基金 国家自然科学基金资助项目(51205177) 江苏省自然科学基金资助项目(BK2012277) 江苏省产学研联合创新基金(BY2013066-09)
关键词 双螺旋折流板 螺旋角 传热系数 压降 double helical baffle helix angle heat transfer coefficient pressure drop
  • 相关文献

参考文献10

  • 1Wang Qiuwang,Chen Guidong,Chen Qiuyang. Review of improvements on shell-and-tube heat exchangers with helical baffles[J].{H}Heat Transfer Engineering,2010,(10):836-853.
  • 2刘化瑾,陈亚平,李彦晴,王伟晗,黄锴.当量螺旋角对三分螺旋折流板换热器性能的影响[J].化学工程,2010,38(7):22-25. 被引量:9
  • 3Peng B,Wang Q W,Zhang C. An experimental study of shell-and-tube heat exchangers with continuous helical baffles[J].{H}Journal of Heat Transfer,2007,(10):1425-1431.
  • 4钱颂文.换热器设计手册[M]{H}北京:化学工业出版社,2002.
  • 5Yang J,Zeng M,Wang Q. Forced convection heat transfer enhancement by porous pin fins in rectangular channels[J].J Heat Transfer-Trans ASME,2010.051702.
  • 6Wang Y,Liu Z,Huang S. Experimental investiga-tion of shelland-tube heat exchanger with a new type of baffles[J].Heat Mass ransfer,2011,(47):833-839.
  • 7Fan A W,Deng J J,Guo J. A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip inserts[J].{H}Applied Tnermal Engineering,2011,(31):2819-2828.
  • 8Peng B,Wang Q W,Zhang C. An experimental study of shell and tube heat exchangers with continuous helical baffles[J].{H}ASME J Heat Transfer,2007,(129):1425-1431.
  • 9Li Y,Jiang X,Huang X. Optimization of high-pres-sure shell-andtube heat exchanger for syngas cooling in an IGCC[J].{H}International Journal of Heat and Mass Transfer,2010,(53):4543-4551.
  • 10Guo Z Y,TaG W Q,Shah R K. The field synergy princi-ple and its applications in enhancing single phase con-vective heat transfer[J].{H}International Journal of Heat and Mass Transfer,2005,(9):1797-1807.

二级参考文献12

  • 1王秋旺.螺旋折流板管壳式换热器壳程传热强化研究进展[J].西安交通大学学报,2004,38(9):881-886. 被引量:82
  • 2王晨,桑芝富.1/4椭圆螺旋折流板换热器性能的数值模拟[J].过程工程学报,2007,7(3):425-431. 被引量:14
  • 3LUTCHA J,NEMCANSKY J.Performance improvement of tubular heat exchangers by helical baffles[J].Chemical Engineering Research & Design,1990,68(3):263-270.
  • 4STEHLIK P,NEMCANSKY J,KRAL D,et al.Compa-rison of correction factors for shell-and-tube heat exchangers with segmental or helical baffles[J].Heat Transfer Engineering,1994,15(1):55-65.
  • 5STEHLIK P,WADEKAR V.Different strategies to improve industrial heat exchange[J].Heat Transfer Engineering,2002,23(6):36-48.
  • 6ANDREWS M,MASTER B I.Three-dimensional modeling of a helixchanger heat exchanger using CFD[J].Heat Transfer Engineering,2005,26(6):22-31.
  • 7MASTER B I,CHUNANGAD K S,BOXMA A J,et al.Most frequently used heat exchangers from pioneering research to worldwide applications[J].Heat Transfer Engineering,2006,27(6):4-11.
  • 8JAFARI NASRA M R,SHAFEGHAT A.Fluid flow analysis and extension of rapid design algorithm for helical baffle heat exchangers[J].Applied Thermal Engineering,2008,28(11/12):1324-1332.
  • 9LEI Yonggang,HE Yaling,LI Rui,et al.Effects of baffle inclination angle on flow and heat transfer of a heat exchanger with helical baffles[J].Chemical Engineering and Processing,2008,47 (12):2336-2345.
  • 10陈亚平.适合于正三角形排列布管的螺旋折流板换热器[J].石油化工设备,2008,37(6):1-5. 被引量:38

共引文献8

同被引文献53

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部