期刊文献+

重力场下垂直微力发生装置的研究 被引量:5

Study of vertical micro force generator in gravitational field
下载PDF
导出
摘要 随着海洋科学研究的不断深入,可测微小上升流的流速传感器的重要性越来越突出。为了解决对其标定需要稳定的μN级微力这一难题,文章提出了一种可行的垂直微力发生装置,并对整体装置在重力场作用下的变形及微力缩小效果进行分析,最终提出了一种对称差动配重式结构方案;通过有限元分析软件得出装置理论缩小倍数。结果显示:这种对称配重式差动装置有效减小了装置在重力场下的变形,同时能够输出稳定的μN级微力。 With the deepening of the marine science research ,the velocity sensor for measuring tiny up-welling flow becomes more and more important .In order to solve the difficult problem that the cali-bration of the sensor needs stable micro force of μN grade ,a feasible vertical micro force generator is put forward ,the deformation of the whole device and the effect of micro force reduction in the gravita-tional field are analyzed ,and a kind of symmetric counterweight and differential structure is put for-ward .Finally ,the theoretical narrow multiples are gotten by using the finite element analysis soft-ware .The results show that the device with symmetric counterweight and differential structure effec-tively reduces the deformation of device in the gravitational field and can produce stable micro force ofμN g rade .
出处 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2014年第2期134-136,163,共4页 Journal of Hefei University of Technology:Natural Science
基金 国家自然科学基金资助项目(41076061)
关键词 垂直微力 微力发生装置 重力场 对称配重 有限元分析 vertical micro force micro force generator gravitational field symmetric counterweight finite element analysis
  • 相关文献

参考文献8

二级参考文献32

  • 1邹志纯.亥姆霍兹线圈空间的磁场分布[J].西安邮电学院学报,2004,9(3):89-91. 被引量:24
  • 2[1]H Liu, J Butterfass, M Grebenstein, G Hirzinger. DLR Multisensory Articulated Hand I and II. Proceedings of the 2001 International Workshop on Bio-Robotics & Teleoperation, Beijing, China. May 2001, 76-83
  • 3徐科军,传感器动态特性的实用研究方法,1999年
  • 4李成,博士学位论文,1999年
  • 5孙增忻,控制系统的计算机辅助设计 BASCI程序汇编,1988年
  • 6Tamio TANIKAWA,Motohide UKIANA,et al.Design of 3 DOF Parallel Mechanism with Thin Plate for Micro Finger Module in Micro Manipulator[A].Proceedings of the 2002 IEEE/RSJ[C].2002.
  • 7PAROS J M,WEISIBORD L.How to design flexure hinge[M].Machine Design,1965 (37):151-157.
  • 8LOBONTIU N,GARCIA E.Two-axis flexure hinges with axially-collocated and symmetric notches[J].Computer & Structures,2003 (81):1329-1341.
  • 9LOBONTIU N,GARCIA E.Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanisms[J].Computer & Structures,2003 (81):2797-2810.
  • 10LOBONTIU N,JEFFREY S N,PAINE,et al Design of symmetric conic-section flexure hinges based on closed-form compliance equations[J].Mechanism and Machine Theory,2002(37):477 -498.

共引文献44

同被引文献36

引证文献5

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部