期刊文献+

装有扇形铅黏弹性阻尼器框架结构的设计与分析 被引量:9

Analysis and Design of Frame Structure with Sector Lead Viscoelastic Dampers
下载PDF
导出
摘要 给出了装有扇形铅黏弹性阻尼器框架结构的设计步骤,对某11层钢筋混凝土框架结构进行减震设计。采用ETABS和Perform-3D软件分别对原结构和装有扇形铅黏弹性阻尼器框架结构进行了多遇地震下的时程分析和罕遇地震下的弹塑性时程分析。结果表明:安装扇形铅黏弹性阻尼器能显著降低结构的地震反应,保护框架节点,达到小震下减小层间位移角和"大震不倒"的性能目标。 The design procedure of frame structure with sector lead viscoelastic dampers (SLVD) is provided. The energy dissipation design of 11-story reinforced concrete frame structure is carried out. Nonlinear time history analysis of frame structure with and without SLVD under frequent and rare earthquakes is conducted using software ETABS and Perform-3D. The results show that the seismic responses of structure with SLVI) are reduced dramatically. Frame joints are protected effectively achieving the performance objective that the maximum story drift of the building is reduced and the building does not collapse under rare earthquakes.
出处 《工程抗震与加固改造》 北大核心 2014年第1期70-75,共6页 Earthquake Resistant Engineering and Retrofitting
基金 国家自然科学基金(51208128) 广东省自然科学基金团队项目(8351009101000001) "羊城学者"首席科学家项目(10A0265) 广东省教育部产学研项目(20090912)
关键词 扇形铅黏弹性阻尼器 消能减震设计 减震性能 sector lead viscoelastic damper energy dissipation design seismic performance
  • 相关文献

参考文献2

二级参考文献25

  • 1周云,邓雪松,阴毅,吴仕元,庄中华.复合型铅粘弹性阻尼器的性能试验研究[J].工程抗震与加固改造,2005,27(1):42-47. 被引量:29
  • 2叶志雄,李黎,聂肃非,江宜城.铅芯橡胶支座非线性动态特性的显式有限元分析[J].工程抗震与加固改造,2006,28(6):53-56. 被引量:11
  • 3[1]Perry, C. L., E. A. Fierro, H. Sedarat and R. E. Scholl.Seismic Upgrade in San Fran-cisco Using Energy Dissipation Devices. Earthquake Spectra, Vol. 9, No.3 (1993)
  • 4[2]Kelly, J. M., and M. S. Skinner. Development and Testing of Restraints for Nuclear Piping System.Report No. UCB/EERC-80/21, University of California, Berkeley (1980)
  • 5[6]Xia, C., R. D. Hanson and J. K. Wight. A Study of ADAS Element Parameters and Their Influence on Earthquake Response of Building Structures.University of Michigan, Civil Engineering Department (1990)
  • 6[8]IAEE. Earthquake Resistant Regulations, A World List. International Association for Earthquake Engineering,Tokyo(1988)
  • 7[10]Uang, C. M.. Establishing R (or Rw) and Cd Factors for Building Seismic Pro-visions. Journal of Structural Engineering, ASCE, Vol. 117, No. 1 (1991)
  • 8[11]ICBO. Uniform Building Code-1991, Inter-nation Conference of Building Officials (1994)
  • 9[12]AISC/ASD. Manual of Steel Construction, Allowable Stress Design. American Institute of Steel Construction. 9th Edition, Chicago (1989)
  • 10[13]SEAONC. (Tentative) Seismic Design Requirements for Passive Energy Dissipation Systems. Structural Engineers Association of Northern California (1993)

共引文献15

同被引文献61

引证文献9

二级引证文献55

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部