期刊文献+

云南高硫铜锌矿石浮选试验研究 被引量:3

Experimental Study on Flotation of High-sulfur Cu-Zn Ore in Yunnan
下载PDF
导出
摘要 试验矿石属于高硫铜锌多金属矿,含铜黄铁矿石多为浸染状,矿石的矿物组成比较复杂。原矿含铜0.736%,含锌1.44%,含硫25.02%。在确定较佳药剂制度和控制浮选时间的基础上,进行了闭路流程试验,试验结果为铜精矿的品位为20.15%,回收率为87.61%;锌精矿的品位为52.31%,回收率为83.55%,技术指标较好,为该矿石的综合利用提供参考依据。 The ore belongs to high-sulfur Cu-Zn polymetallic ore, in which the pyrite containing copper is dissemina- ted, and the mineral composition of ore is complex. The grade of Cu, Zn and S in the raw ore is 0. 736%, 1.44% and 25.02% respectively. On the basis of the best reagent system and controlling flotation time, the results of the closed-circuit test as follows :the copper concentrate with the grade of 20.15% and the recovery of 87.61% and the zinc concentrate with the grade of 52.31% and the recovery of 83.55% were obtained. The technological index is relatively good,which provides reference base for comprehensive utilization of this kind of ores.
机构地区 昆明理工大学
出处 《矿产综合利用》 CAS 2014年第1期31-34,44,共5页 Multipurpose Utilization of Mineral Resources
基金 云南省自然科学基金重点项目(2013FA009)资助
关键词 浮选 高硫铜锌矿 铜锌分离 Flotation High-sulfur Cu-Zn ore Copper-zinc separation
  • 相关文献

参考文献5

二级参考文献56

共引文献41

同被引文献128

引证文献3

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部