摘要
根据污染源头控制原则和废水再生回用的要求,针对纺织印染废水水质水量的特点,提出了废水处理清浊分流方案。结果显示,两套系统处理效果均较好,出水水质满足《纺织染整工业水污染物排放标准》(GB 4287—1992)Ⅰ级标准。回用水处理采用复合反应器+亚滤系统,出水水质满足《纺织染整工业废水治理工程技术规范》(HJ 471—2009)中的漂洗用回用水水质标准。
According to the principle of pollution source control and wastewater reuse requirement, a separation scheme of high and low concentration wastewater was proposed in the light of the characteris- tics of textile printing and dyeing wastewater quantity and quality. The results showed that the two sets of treatment systems performed well, and the effluent quality met the first grade criteria specified in the Dis- charge Standard of Water Pollutants for Dyeing and Finishing of Textile Industry ( GB 4287 - 1992 ). Composite reactor and subfiltration system were used to treat reuse water, and the effluent quality met the rinsing requirements in the Wastewater Treatment Project Technical Specification for Dyeing and Finishing of Textile Industry ( HJ 471 - 2009 ).
出处
《中国给水排水》
CAS
CSCD
北大核心
2014年第6期51-53,共3页
China Water & Wastewater
关键词
纺织印染废水
清浊分流
亚滤系统
回用
textile printing and dyeing wastewater
separation of high and low concentrationwastewater
subfiltration system
reuse