期刊文献+

粘贴法加固混凝土构件的防火试验研究

Experimental Analysis of Concrete Members Reinforced by Paste Method in the Fire
下载PDF
导出
摘要 试验研究分析了涂不同厚度防火涂料的粘贴法加固混凝土试件在火灾下的耐火极限。试验结果表明,碳纤维布和钢板对试件温度场的影响是相同的,厚涂型钢结构防火涂料对混凝土结构的防火作用明显,防火涂料厚度与防火性能并不成正比。试验确定粘贴法加固混凝土构件防火涂层厚度的最佳取值为40mm。 The fire resistance rating of concrete members coated with different thickness of fire-resistant coating was analyzed by experiment in the fire.Studies showed that the impact of CFRP and steel on the temperature field of the specimens was the same,the fireproof effect of thick-layer fire-resistant coating for steel structure was obvious,the thickness of the fire-resistant coating and the fire performance are not proportional.It identified that the best values of the fire retardant coating thickness is 40 mm.
出处 《建材世界》 2014年第1期21-24,共4页 The World of Building Materials
关键词 粘贴法加固混凝土构件 火灾 耐火极限 防火设计 paste reinforced concrete members fire fire resistance rating fire protection design
  • 相关文献

参考文献6

  • 1ROSS C A, JEROME D M, TEDESCO J W, et al. Strengthening of Reinforced Concrete Beam with Externally Bonded Composite Laminates[J]. ACI Structure Journal, 1999,96(2) : 212-220.
  • 2张继文,岳丽婕,吕志涛,顾明亮.混凝土梁侧面粘贴CFRP布的结构加固性能的试验研究[J].东南大学学报(自然科学版),2002,32(5):760-765. 被引量:16
  • 3罗苓隆,毛星明.碳纤维布加固修复混凝土结构技术实际工程运用[J].四川建筑科学研究,2001,27(2):16-17. 被引量:4
  • 4Williams B. Fire Performance of FRP-strengthened Reinforced Concrete Flexural Members[D]. Kingston: Queen's Uni- versity, 2004.
  • 5碳纤维片材加固修复混凝土结构技术规程.CECS146:2003.碳纤维片材加固修复混凝土结构技术规程[S].北京:中国计划出版社,2002.
  • 6中华人民共和国建设部.GB 50016-2006 建筑设计防火规范[S].北京:中国建筑工业出版社,2006.

二级参考文献8

  • 1[1]Saadatmanesh H, Ehsani M R. RC beams strengthened with FRP plates: I experimental study [J]. ASCE J Struct Eng,1991,117(11):3417-3433.
  • 2[2]Garden H N, Hollaway L C, Thorne A M. A preliminary evaluation of carbon fiber reinforced polymer plates for strengthening reinforced concrete members [A]. In: ICE Proc of Structures and Buildings[C]. 1997.127-142.
  • 3[3]Ross C A, Jerome D M, Tedesco J W, et al. Strengthening of reinforced concrete beams with externally bonded composite laminates [J]. ACI Struct J, 1999,96(2):212-220.
  • 4[4]Raoof M,El-Rimawi J A,Hassanen M A H. Theoretical and experimental study on externally plated RC beams [J]. Eng Struct, 2000,22:85-101.
  • 5[5]Teng J G, Smith S T, Yao J, et al. Strength model for intermediate flexural crack induced debonding in RC beams and slabs [A]. In: Teng J G ed. Proceedings of the International Conference on FRP Composites in Civil Engineering [C].UK: Elsevier Science Ltd, 2001. 579-587.
  • 6[6]Wu Z S, Yuan H, Niu H D. Stress transfer and fracture propagation in different kinds of adhesive joints [J]. ASCE J Eng Mechanics, 2002,128(5):562-573.
  • 7Q/NC 002-98,碳纤维用粘接材料[S].
  • 8Q/NERC 001-98,碳纤维布加固修补技术规程(试行)[S].

共引文献48

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部