摘要
为实时监测煤矿用全液压钻机的钻进过程参数,实现钻机故障的快速诊断,设计了一种基于CAN总线的钻参仪,详细介绍了该仪器硬件、软件设计以及特点。该仪器采用分布式控制,通过CAN总线交换数据,不仅可实时监测并显示泵压、转速、泵量、油箱温度、油位和瓦斯体积分数等参数,还可通过计算机实现数据传输,满足了现场施工要求。
In order to real-timely monitor process parameter of mine-used full hydraulic drilling machine and to realize rapid fault diagnosis of drilling machine, a drilling parameter monitor based on CAN bus was designed, designs of hardware, software and characteristics of the monitor were introduced in details. The monitor adopts distributed control, uses CAN bus to exchange data, not only can real-timely monitor and display pump pressure, rotating speed, pump volume and temperature of fuel tank , oil level and gas concentration, but also can achieve data transmission through computer, which satisfies requirements of site construction.
出处
《工矿自动化》
北大核心
2014年第3期25-27,共3页
Journal Of Mine Automation
基金
中煤科工集团常州自动化研究院科研项目(12SY007)
关键词
钻机
钻参仪
CAN总线
传感器
信号转换器
数据采集
drilling machine
drilling parameter monitor
CAN bus
sensor
signal converter
data collection
