2Grimmer V, Goller M, Swoboda M. Numerical Investiga- tion of Endwall Boundary Layer Removal on Highly-load- ed Axial Compressor Blade Rows. ASME GT 2005- 68699, 2005.
3Rao N M, Camci C. Axial Turbine Tip Desensitization by Injection from a Tip Trench( Part 1 ) : Effect of Injection Mass Flow Rat. ASME GT 2004-53256, 2004.
4Rao N M, Camci C. Axial Turbine Ttip Desensitization by Injection from a Tip Trench (Part 2 ) : Leakage Flow Sensitivity to Injection Location. ASME GT 2004-53258, 2004.
6Shim Pei M, Hoshio T. Numerical Calculation of Flow for Cascade with Tip Clearance. ASME GT 1994-361, 1994.
7Farokhi S. A Trade-off Study of Rotor Tip Clearance Flow in a Turbine/Exhaust Diffuser system. ASME GT 1987- 229, 1987.
8Rao N M, Cengiz C. A Flow Visualization Study of AxialTurbine Tip Desensitization by Coolant Injection from a Tip trench. ASME IMECE 2004-60943, 2004.
9Li Wei, Qiao Weiyang, Xu Kaifu. Numerical Simulation of Active Control on Tip Leakage Flow in Axial Turbine. Chinese Journal of Aeronautics, 2009 (22).
10Krishnababu S K, Hodson H P, Booth G D, et al. Aer- othermal Investigation of Tip leakage Flow in a Film Cooled Industrial Turbine Rotor. Journal of Turbomach- inery, 2010, 132(2).
6DUNN M G. Convective heat transfer and aerodynamics in axial flow turbines[J].ASME Journal of Turbomachinery, 2001, 123(4): 637-686.
7BINDON J P. The measurement and formation of tip clearance loss[J]. ASME Journal of Turbomachinery, 1989, 111(2): 257-263.
8KWAK J S, HAN Jechin. Heat transfer coefficients on the squealer tip and near squealer tip regions of a gas turbine blade[J]. ASME Journal of Turbomachinery, 2003, 125(4). 669-677.
9NEWTON P J, LOCK G D, KRISHNABABU S K, et al. Heat transfer and aerodynamics of turbine blade tips in a linear cascade[J].ASME Journal of Turbomachinery, 2006, 128(2): 300-309.
10YANG Dianliang, FENG Zhenping. Tip leakage flow and heat transfer predictions for turbine blades [C]// Proceedings of ASME Turbo Expo 2007. New York, USA:ASME, 2007: 589-596.
