摘要
An increasing number of annealing furnaces have recently been using cheaper and cleaner natural gas （NG） instead of liquefied petroleum gas （LPG） as fuel gas.However,the fuel gas of the furnaces often needs to be changed when NG supply is not adequate or when LPG becomes cheaper.Usually,changing the fuel gas involves changing various equipment as well as control parameters for instruments and the control system and hence is time consuming.Therefore,it is important to develop a quick process for changing fuel gas.This study discusses the techniques for quickly changing fuel gas in an annealing furnace.These techniques deal with the design of the pipe,valve and burner,the selection of the flow meter and the flow control valve,the switch of the software and parameters for the control system,as well as the operation,commissioning and hot test of the furnace when the fuel gas is changed.Using these techniques,it is possible to change fuel gas in 6 h.
An increasing number of annealing furnaces have recently been using cheaper and cleaner natural gas （NG） instead of liquefied petroleum gas （LPG） as fuel gas.However,the fuel gas of the furnaces often needs to be changed when NG supply is not adequate or when LPG becomes cheaper.Usually,changing the fuel gas involves changing various equipment as well as control parameters for instruments and the control system and hence is time consuming.Therefore,it is important to develop a quick process for changing fuel gas.This study discusses the techniques for quickly changing fuel gas in an annealing furnace.These techniques deal with the design of the pipe,valve and burner,the selection of the flow meter and the flow control valve,the switch of the software and parameters for the control system,as well as the operation,commissioning and hot test of the furnace when the fuel gas is changed.Using these techniques,it is possible to change fuel gas in 6 h.
