摘要
针对不同直径不同高径比芯样推定混凝土强度问题,选取了本地区常用的原材料,制作了C20~C55八个强度等级2500mm×200mm×1650mm的试件,钻取直径为50、70、100mm,得到了1368个高径比为0.5、O.7、1.0的芯样。利用回归分析方法,得到了不同直径不同高径比芯样的回归方程,给出了不同直径不同高径比芯样的折算系数,同时,运用方差分析方法,得到了直径、高径比对芯样尺寸效应的影响程度,为小芯样测强在本地区的推广奠定了基础。
According to different diameters and height-diameter ratios core samples predicting concrete strength, using the typical raw materials of local area,the simples of C20-C55 of eight 2 500 mm×200 mm×1650 mm samples are made.The values of 1368 core samples compressive strength are obtained, which are the samples of 50,70,100 mm diameter and 0.5,0.7,1.0 height-diameter ratios.Using the re- gression analysis to obtain core samples of different diameters and height-diameter ratio regression equation, and gives correction coeffi- cients.meanwhile, through variance analysis method, the influence degree of diameter and height-diameter ratio are given.This study laid a foundation for small core samples measured in the region to apply.
出处
《混凝土》
CAS
CSCD
北大核心
2014年第3期141-143,共3页
Concrete
基金
国家自然科学基金项目(51078124
51278164
51378170)
国家科技支撑项目(2013BAJ10B09-2
2013BAK01B03)
河北省自然基金项目(E2012401052
E2012401044)
唐山市科技局项目(12130202b)
大连理工大学海岸和近海工程国家重点实验室基金项目(LP1209)
关键词
钻芯法
尺寸效应
芯样抗压强度
小直径芯样
折算系数
drilled core method
size effect
strength of core specimen
small core sample
correction coefficient