摘要
利用动力有限元软件Ansys/ls-dyna建立有限元模型模拟了某冷却塔爆破拆除的倒塌过程,取得了与实际爆破效果较为一致的结果。在此基础上,对此冷却塔模型在另外3种爆破切口下的倒塌效果进行了模拟,对比分析了爆破切口对冷却塔的倒塌过程、触地震动效应及爆堆面积的影响。
A cooling tower's collapsing process under explosive demolition was simulated by the use of dynamic finite element analysis program Ansys/Ls -dyna, and the results showed that it is very close to the collapse of the ac- tual process. On this basis, the collapsing process of the finite element mode under three different blast cuts were sim- ulated. The effects of blast cut on cooling tower's collapsing process were analyzed,which played guiding role in the design of cut parameters of blasting projects with similar situation.
出处
《爆破》
CSCD
北大核心
2014年第1期92-95,共4页
Blasting
关键词
冷却塔
爆破拆除
数值模拟
爆破切口参数
cooling tower
explosive demolition
numerical simulation
blast cut parameter