期刊文献+

针状铁素体晶粒取向差角度的EBSD研究 被引量:1

Research on Acicular Ferrite Grain Misorientation Angle Based on Electron Backscatter Diffraction
下载PDF
导出
摘要 利用电子背散射衍射技术得到了成像质量图、针状铁素体晶粒取向差角度分布柱状图,表明取向差角度分布出现两个峰值,一个出现在针状铁素体晶粒间的取向差在0~5°范围内,另一个出现在针状铁素体与其邻近的马氏体/贝氏体晶粒的取向差在50°~60°范围内.可以推测这些针状铁素体晶粒可能是从同一个奥氏体晶粒上生长演变形成的,但也可能是针状铁素体晶粒在生长后期合并的结果. The electron backscatter diffraction technique is adopted to obtain the imaging quality diagram and distribution histogram of acicular ferrite grain orientation angles, which shows that there are two peak values of orientation angles when the misorientation between acieular ferrite grains is 0-5° and when the misorientation between acicular ferrite grains and adjacent martensite or bainite grains is 50°-60°, It is as- sumed that these acicular ferrite grains may evolve from the same austenite grain,or the grains may be u- nited during the later period of their development.
出处 《甘肃科学学报》 2014年第2期30-33,共4页 Journal of Gansu Sciences
关键词 针状铁素体 电子背散射衍射 取向差 Acicular ferrite Electron backseatter diffraction Misorientation
  • 相关文献

参考文献11

  • 1Humphreys F J. Grain and Subgrain Characterisation by Elec- tron Backseatter Diffraction[J]. Journal of Materials Science, 2001,36:3 833-3 854.
  • 2Humphreys F J. Characterization of Fine scale Microstruc tures by Electron Backscattered Diffraction(EBSD)[J]. Scrip- ta Materialia, 2004,51 : 771-776.
  • 3Bouyne E, Flower H M, Lindley T C, et al. Use of EBSD Technique to Examine Microstructure and Cracking in a Bai- nitic Steel[J]. Scripta Materialia, 1998,39 : 295-300.
  • 4Wilson A W, Spanos G. Application of Orientation Imaging Microscopy to Study Phase Transformations in Steels[J]. Ma terials Characterization, 2001,46 : 407-418.
  • 5Badiola D J,Mendia A I,Gutierrez I. Study by EBSD of the Development of the Substructure in a Hot Deformed 304 Stainless Steel [J]. Materials Science and Engineering A, 2005,394 ~ 445-454.
  • 6贾涓,朱微微,代礼斌,宋新莉,袁泽喜.无取向硅钢晶粒与晶界特征的EBSD分析[J].武汉科技大学学报,2009,32(5):491-495. 被引量:2
  • 7韩赟,时捷,武文华,徐乐,曹文全,董瀚.TiC纳米析出相对低碳马氏体钢的韧化机理[J].材料热处理学报,2013,34(5):65-69. 被引量:3
  • 8于浩,张道达,肖荣亭,周平,董杰吉,杜显彬.回火温度对Q960钢小角度晶界的影响[J].北京科技大学学报,2011,33(8):952-957. 被引量:13
  • 9Suh D W,Kang J H,Oh K H,et al. Evaluation of the Devia- tion Angle of Ferrite from the Kudjumov-Sachs Relationship in a Low Carbon Steel by EBSD[J]. Scripta Materialia,2002, 46:375-378.
  • 10尚成嘉,王学敏,周召槿,梁鑫,缪成亮,贺信莱.Mn-Mo-Nb-B低碳微合金钢中温转变组织的演化[J].金属学报,2008,44(3):287-291. 被引量:19

二级参考文献47

  • 1王良芳.我国电工钢生产现状及发展建议[J].中国冶金,2004,14(7):16-22. 被引量:15
  • 2尚成嘉,胡良均,杨善武,王学敏,赵运堂,贺信莱.低碳微合金钢中针状铁素体的形成与控制[J].金属学报,2005,41(5):471-476. 被引量:59
  • 3赵运堂,尚成嘉,贺信莱,郭晖.低碳Mo-Cu-Nb-B系微合金钢的中温转变组织类型[J].金属学报,2006,42(1):54-58. 被引量:27
  • 4Jong T P, Jerzy A S. Evolution of recrystallization texture in non-oriented electrical steels [J]. Acta Materialia, 2003, 51:3 037-3 051.
  • 5Marco A C, Sebastiao C P. Effect of the annealing temperature on the structure and magnetic properties of 3% Si non-oriented steel[J].Journal of Magnetism and Magnetic Materials, 2003, 254-255: 379-381.
  • 6Dorner D, Zaefferer S, Lahn L, et al. Overview of microstructure and microtexture development in grain-oriented silicon steel[J].Journal of Magnetism and Magnetic Materials, 2006, 304: 183-186.
  • 7Prem K R, Samajdar I, Viswanathan N N, et al. Relative effect of texture and grain size on magnetic properties in a low silicon non-grain oriented electrical steel [J].Journal of Magnetism and Magnetic Materials, 2003, 264: 75-85.
  • 8余永宁.金属学原理[M].北京:冶金工业出版社,2007:348-470.
  • 9Morito S, Tanaka H, Konishi R, et al. The morphology and crystallography of lath martensite in Fe-C alloys. Acta Mater, 2003, 51(6) : 1789.
  • 10Dhua S K, Ray A, Sarma D S. Effect of tempering temperatures on the mechanical properties and microstructures of HSLA-100 type copper-beating steels. Mater Sci Eng A, 2001, 318(1/2) : 197.

共引文献33

同被引文献4

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部