期刊文献+

基于弧控制的等离子切割电源新型复合控制策略 被引量:3

A novel composite control strategy for plasma cutting power supply based on arc control
下载PDF
导出
摘要 根据非高频引弧技术在等离子切割电源中的应用,分析了等离子电弧的静态特性,推导出了等离子电弧数学模型,并结合电源在非高频引弧、弧转移及弧能量突变过程中的控制需求.提出了一种新型复合控制策略,该策略的内环是由前馈补偿的电弧电压与反馈电弧电压构成电压闭环复合控制,外环则以电流闭环对等离子弧柱能量进行控制,形成了一种前馈补偿双闭环复合控制方式,以满足电源在非高频引弧负载条件下对快速性和稳定性的控制需求.结果表明,文中所提控制策略不仅可以提高系统的快速性和鲁棒性,还具有优异的动态响应能力,电源的非线性适应能力强,有效的解决了等离子切割电源的控制需求. This paper analyzes static characteristics of plasma arc with the derivation of plasma arc mathematical model according to the application of low-frequency( LF) pilot arc technology in the plasma cutting power supply,and integrates with the control requirements in low-frequency( LF) pilot arc,arc transferring and arc energy transferring,and proposes a novel composite control strategy. In order to meet the power's control requirements of rapidity and stability with the load of low-frequency( LF) pilot arc,the inner loop of this strategy builds up voltage loop composite control with feed-forward arc voltage and feedback arc voltage,and the current outer loop controls the energy of plasma arc,forming a control method of feed-forward composite control of double closed-loop. Simulations and experiments were given to verify that the mentioned control strategy not only improved system's stability and robustness,but also had excellent dynamic responsibility. The power had well non-liner resilience,meeting requirements for plasma cutting power supply.
出处 《焊接学报》 EI CAS CSCD 北大核心 2014年第3期71-75,116-117,共5页 Transactions of The China Welding Institution
基金 陕西省教育厅产业化培育项目(2011JG08) 陕西省科技厅产科技攻关项目(2011K09-05)
关键词 等离子切割电源 弧控制 前馈补偿 前馈补偿双闭环复合控制 plasma cutting power supply arc control feed-forward compensator feed-forward composite control of double closed-loop
  • 相关文献

参考文献12

  • 1Narongrit Sanajit, Anuwat Jangwanitlert. Improved performance of a plasma cutting machine using a half-bridge DC/DC converter [ C] // Robotics and Biomimetics, Bangkok, Thailand, 2009: 1601 - 1608.
  • 2Sanajit N, Jangwanitlert A. A half-bridge DC/DC converter for plasma cutting machine[ C ]// Power Electronics and Drive Sys- tems, Bangkok, Thailand, 2007: 1223-1227.
  • 3Ramakrishnan S, Maya Gershenzon, Frederick Polivka, et al. Plasma generation tor the plasma cutting process [ J ]. IEEE Translations on Plasma Science, 1997, 25 (5) : 937 -946.
  • 4Jia Deli, You Bo, Ren Wenbo, et al. Decoupling control based on PID neural network for plasma cutting system[ C]// 27th Chi- nese Control Conference , Kunming ,Yunnan, China, 2008:659 - 662.
  • 5Young Min Chae, Yungtaek Jang, Milan M, et al. A novel mixed current and voltage control scheme for inverter arc welding ma- chines[ C]// IEEE Applied Power Electronics Conference Expo- sition, Anaheim IEEE, China, 2001:308-313.
  • 6刘宝其,段善旭,李勋,赵耕,刘邦银.逆变式等离子切割电源双闭环控制策略[J].中国电机工程学报,2011,31(9):15-22. 被引量:17
  • 7Nguyen Phi Long, Yasunori Tanaka, Yoshihiko Uesugi. Numeri- cal investigation of the swirl gas angle and arc current dependence on evaporation of hafnium cathode in a plasma cutting arc [ J ]. Plasma Science, 2012, 40(2) : 497 -504.
  • 8雷玉成,郑惠锦.工艺参数对焊接等离子弧的影响[J].焊接学报,2001,22(6):73-76. 被引量:11
  • 9Ramakrishnan S, Rogozinski M W. Properties of electric arc plas- ma for metal cutting[ J]. Journal of Physics D: Applied Physics, UK,1997, 30(4) : 636 -644.
  • 10殷凤良,胡绳荪,郑振太,马力.等离子弧焊电弧的数值模拟[J].焊接学报,2006,27(8):51-54. 被引量:31

二级参考文献43

共引文献176

同被引文献12

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部