期刊文献+

工程车辆自动变速器换挡过程建模与仿真 被引量:9

Gear shift modeling and simulation for construction vehicle
原文传递
导出
摘要 根据某型五速自动变速器具体结构,结合换挡过程中系统的动态特性,应用拉格朗日方法建立基于离合器输入扭矩的行星轮系数学模型.依据换挡时离合器充油过程,使用克服零速区域的数值模拟问题的Woods模型作为离合器结合过程扭矩传递模型.基于Matlab/Simulink软件,搭建换挡过程模型.仿真结果表明:相邻档位离合器充油重叠方式的差别直接影响车辆换挡品质,可为进一步分析离合器结合油压对矿用车辆换挡品质的影响提供合理的仿真模型. Based on the structure and dynamic parameters in clutch engagement of 5gear automatic transmission for off-road construction vehicle,the Lagrange method deriving a mathematical model for the planetary gear sets was developed.As woods static and dynamic friction model could deal with relative speed around the zero,it was used in this clutch engagement model,which was set up in software Matlab/Simulink.Computer simulation shows that fluid passing into the clutch cavities in different way influences the shift quality directly.In addition,this high-fidelity model is properly for analyzing gear shift quality.
出处 《华中科技大学学报(自然科学版)》 EI CAS CSCD 北大核心 2014年第3期112-116,共5页 Journal of Huazhong University of Science and Technology(Natural Science Edition)
基金 国家高技术研究发展计划资助项目(2011AA060404)
关键词 工程车辆 自动变速器 行星轮系 换挡过程 拉格朗日法 虚功原理 construction vehicle automatic transmission planetary set gear shift Lagrange theory principle of virtual displacement
  • 相关文献

参考文献9

  • 1Sun Z, Kumar H. Challenges and opportunities in au tomotive transmission control[C]// Proceedings of A merican Control Conference. Portland~ IEEE, 2005 8-10.
  • 2孙文涛,陈慧岩.电控自动变速器换挡过程控制策略[J].农业机械学报,2008,39(12):23-26. 被引量:11
  • 3曹桂军,葛安林,郑磊,秦贵和.电控机械式自动变速器换挡过程中离合器的接合控制[J].机械工程学报,2005,41(12):234-238. 被引量:20
  • 4Jo sko D, Jahan A, Davor H. Modeling and analysis of automatic transmission engagement dynamics-non- linear case including validation[J]. Journal of Dynam- ic Systems, Measurement and Control, 2006, 128(6) : 251-262.
  • 5Gafvert M. Comparisons of two dynamic friction models[C]//Proceedings of the 1997 IEEE Interna- tional Conference on Control Applications. Hartford: IEEE, 1997: 386-391.
  • 6Haessig D A, Friedland B. On the modeling and sim- ulation of friction[J]. ASME Journal of Dynamic Sys- tems, Measurement, and Control, 1991, 113(9).. 354-362.
  • 7Jo sko D, Jahan A, Davor H, et al. Modeling and analysis of automatic transmission engagement dy- aamic-linear case[J]. ASME Journal of Dynamic Sys- tems, Measurement, and Control, 2006, 128 (6): 263-277.
  • 8唐奎.52吨自卸矿车自动变速器换挡规律研究[D].吉林:吉林大学汽车工程学院,2011.
  • 9赵丁选,崔功杰,李东兵.工程车辆传动系统的换挡品质[J].江苏大学学报(自然科学版),2008,29(5):386-389. 被引量:12

二级参考文献17

  • 1韩顺杰,赵丁选.基于四参数的工程车辆自动变速节能换挡策略[J].江苏大学学报(自然科学版),2006,27(6):505-508. 被引量:8
  • 2唐新星,赵丁选,黄海东,张红彦.工程车辆自动变速控制系统仿真与试验[J].农业机械学报,2007,38(1):26-29. 被引量:15
  • 3Joachim Home, Joachim Bambergera, Peter Michaud, et al. Flatness-based clutch control for automated manual transmissions [J]. Control Engineering Practice, 2003(12) : 1 353- 1 359.
  • 4Shim B K, Hahn J O, Lee K I. Development of shift control algorithm using estimated turbine torque[C]. SAE Paper 2000 - 01 - 1150, 2000.
  • 5Msmao Kawai, Hideki Aruga. Development of a shift control system for automatic transmission using information from a vehicle navigation system[C]. SAE Paper 1999 - 01 - 1095, 1999.
  • 6Baek-Hyun Cho, Jong-Sun Oh, Won Hi-Lee. Modeling of pulse width modulation pressure control system for automatic transmission[C]. SAE Paper 2002 - 01 - 1257, 2002.
  • 7Luigi G, Francesco V. Optimal control of dry clutch engagement. SAE Paper 2000-01-0837, 2000.
  • 8Pettersson M, Nielsen L. Gear shifting by engine control.IEEE Transactions on Control Systems Technology, 2000,8(3): 495-507.
  • 9Luigi G, Francesco V. Engagement control of automotive dry clutch. In: Proceedings of the American conference,Chicago, Illinois, 2000, 2(28-30): 1016-1017.
  • 10John D, Constantine H. Linear Control System Analysis and Design. Beijing: Tsinghua University Press, 2000.

共引文献39

同被引文献59

引证文献9

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部