轴向偏差报警系统设计优化及KMP仪表调试问题研究

Research on axial power deviation alarm system design optimization and KMP instrument commissioning issue

原有的反应堆轴向功率偏差报警系统在实现功能的同时设计较为简单,没有考虑到某些异常工况的出现,这种异常工况可能会造成结果不是很理想,因此,本文专门对此进行了研究,提出一种对反应堆轴向功率偏差报警系统进行设计优化的方案,以达到预期的控制和指示目标。设计优化方案在设备实施时,由于KMP仪表硬件本身固有的局限性,在KMP仪表的调试期间引起了较多突出的问题,本文对这些问题也进行了研究。

The initial design scheme of reactor axial power deviation alarm system is relative simple, which didn＆#39;t consider some abnormal conditions that may cause some unideal results, so the research on this problem is carried on. An optimal design scheme of reactor axial power deviation alarm system is promoted to achieve the ideal control and indication objective. When performing in equipment, due to the KMP instrument hardware inherent nature, a lot of outstanding issues which appear during KMP commissioning will be researched.