期刊文献+

Q235钢热浸渗铝层的组织分析和性能 被引量:15

INVESTIGATION IN MICROSTRUCTURE AND PROPERTIES OF HOT-DIP ALUMINIZING LAYER OF Q235 STEEL
下载PDF
导出
摘要 分析了Q2 35钢热浸渗铝层的组织 ,并对其抗高温氧化和耐高温腐蚀性能进行了研究。显微硬度试验结果表明渗层硬度可达 10 0 0HV ,并具有较大的脆性。经扩散退火后 ,渗层组织和显微硬度都发生了明显的变化。高温氧化和热腐蚀试验结果表明 ,渗铝Q2 35钢的抗高温氧化性能和 1Cr18Ni9Ti奥氏体不锈钢相当 。 The microstructure and the properties of anti-oxidization and hot-corrosion resistance of hot-dip aluminized Q235 steel was investingated.Microhardness tests showed that HV 0.1 hardness of aluminizing layer could reach 1000HV and the layer was found quite brittle.The microstructure and the microhardness of aluminizing layer were found changed obviously after annealing.High temperature Oxidization and hot-corrosion tests showed that the anti-oxidization properties of aluminized Q235 steel and 1Cr18Ni9Ti stainless steel were of the same level, but the former 's hot-corrosion resistance was superior to the latter 's remarkably.
出处 《南京化工大学学报》 2000年第6期10-13,共4页 Journal of Nanjing University of Chemical Technology(Natural Science Edition)
关键词 Q235钢 渗铝 显微硬度 高温氧化 热腐蚀 热浸法 铝层 Q235 steel aluminizing microhardness oxidization hot-corrosion
  • 相关文献

参考文献5

二级参考文献3

共引文献59

同被引文献177

引证文献15

二级引证文献80

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部