期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

基于ANSYS对破碎辊铸造过程中温度场的仿真分析 被引量：1

Simulation Study on Temperature Field in Casting Process for Broken Roll Based on ANSYS Software
下载PDF
导出
摘要 针对破碎辊在工况条件下表面发生金属块剥离、设备无法使用的现象,利用ANSYS软件对破碎辊在铸造过程中的温度场变化进行仿真计算,从而为下一步的工艺优化提供理论数据;同时还通过对破碎辊合金层的硬度测试来进一步证实仿真结果的正确性。 Aimed at the phenomenon of metal block peeling on crushing roller surface metal under working conditions, leading to equipment out of working, the ANSYS sof＇cware was be used to simulation the temperature field of crushing roller in casting process, to provide optimization for next step process. At the same, the correctness of the simulation results was confirmed through testing the hardness of crushing roller.
作者 王家珂 潘毅
机构地区 扬州工业职业技术学院机械工程学院
出处 《铸造技术》 CAS 北大核心 2014年第3期559-561,共3页 Foundry Technology
关键词 破碎辊 ANSYS 温度场 硬度测试 crushing roller ANSYS temperature field hardness test
分类号 TG24 [金属学及工艺—铸造]
  • 相关文献

参考文献7

  • 1符寒光,弭尚林,邢建东,蒋志强.离心铸造高速钢轧辊偏析控制技术研究[J].铸造,2005,54(4):386-390. 被引量：14
  • 2潘毅,陈荣发,王笃雄,蔡郭生,刘韬,吴龙,杨华,李青青.基于多臂式开口织机中阅读臂零件的失效分析[J].金属热处理,2012,37(10):80-83. 被引量：7
  • 3朱森第,等.机械工程材料性能数据手册[M].北京:机械工业出版社.1995.
  • 4Ruifeng Qj, Dedy Ng, Beniamin R. Cormier, M. Sam Mannan. Numerical simulation of LNG Vapor dispersion in Brayton Fire Training Field tests with ANSYS CFX [J]. Journal of Hazardous Materials, 2010(183) : 51-56.
  • 5Chin-Hsiang Cheng. Chi-Kang Chan, Tsung-Chieh Cheng, et al. Modeling, fabrication electro-thermal micro actuator 2008(143) : 360-369. and performance test of an [J]. Sensors and Actuators A. ,.
  • 6Zhao Q F, Wang T Y, Wang J, et al. Template-directed hydrothermal synthesis of hydroxyapatite as a drug delivery system for the poorly water-soluble drug credible [J]. Applied Surface Science, 2011. 257(23): 10126-10133.
  • 7胡晓辉.60Si2 Mn弹条断裂失效分析[J].理化检验（物理分册）,2001,37(11):498-499. 被引量：14

二级参考文献14

  • 1李慧芳 萧振荣.合金钢及热处理工艺学[M].北京:机械工业出版社,1986..
  • 2Kim C K, Park J Il, Ryu J H, et al. Correlation of microstructure and thermal-fatigue properties of centrifugally cast high-speed steel rolls [J]. Metallurgical and Materials Transactions A, 2004,35A (2): 481 - 492.
  • 3Kim S W, Lee U J, Woo K D, et al. Solidification microstructures and mechanical properties of vertical centrifugal cast high speed steel [J]. Materials Science and Technology, 2003, 19(12): 1727-1732.
  • 4Stelian C, Delannoy Y, Fautrelle Y, et al. Solute segregation in directional solidification of GaInSb concentrated alloys under alternating magnetic fields [J]. Journal of Crystal Growth, 2004,266 (1-3): 207-215.
  • 5Yang Yuansheng, Liu Qingmin, Jiao Yuning, et al. Application of steady magnetic field for refining solidification structure and enhancing mechanical properties of 25Cr-20Ni-Fe-C alloy in centrifugal casting [J]. ISIJ Inter., 1995, 35 (4): 389-392.
  • 6Apaydin N J. Effect of stirring on the bulk solidification of hypoeutectic and eutectic Al-Si alloys [J]. Mater. Sci. Lett., 1982, 1(1): 39-43.
  • 7Yang Yuansheng, Hu Zhuangqi. Solidification of alloys in electromagnetic field [J]. Z. Metallkd., 2000, 91 (4): 280-284.
  • 8Yang Yuansheng, Liu Qingmin, Jiao Yuning, et al. Solidification structure of 25Cr-20Ni-Fe-C alloy by electromagnetic centrifugal casting [A]. International Symposium on Electromagnetic Processing of Materials [C]. Nagoya: ISIJ, 1994. 420～425.
  • 9Ladenburg R W. Physical measurements in gas dynamics and in combustion [M]. New York: Prince-ton University Press,1964, 137- 144.
  • 10许为民,徐春园.我国纺织机械发展现状及发展对策[J].甘肃科技,2008,24(2):19-20. 被引量：6

共引文献33

同被引文献6

  • 1李慧芳，萧振荣，沈济万．合金钢及热处理工艺学[M]．北京：机械工业出版社,1986．
  • 2Chen Ming, Chen ge. Review and prospect of the shuttle less loom development[J']. Journal of China Textlle Uni- versity(Eng) ,1999,16(1) :56-58.
  • 3Giovanni E Gigante, Stefano Ridolfi, Danieal Ferro. Di-agnostic investigations and statistical validation of EDXRF mapping of the burial monument of Pope Sixtus IV by Antonio Pollaiolo in the Vatican[J]. Journal of Cul- tural Heritage,2012(13):341-351.
  • 4Liu Chein-Shan. An LGSM to identify nonhomogeneous heat conductivity functions by an extra measurement of temperature[J].International Journal of Heat and Mass Transfer, 2008( 51 ) : 2603-2613.
  • 5伍翠兰,陈汪林,元敏.牙轮失效分析研究[J].湖南大学学报（自然科学版）,2010,37(2):50-55. 被引量：5
  • 6潘毅,陈荣发,王笃雄,蔡郭生,刘韬,吴龙,杨华,李青青.基于多臂式开口织机中阅读臂零件的失效分析[J].金属热处理,2012,37(10):80-83. 被引量：7

引证文献1

铸造技术
2014年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部