基于Moldflow的安全帽注塑模的优化设计

Optimization Design of Safety Helmet Injection Mold Based on Moldflow

为了获得更好的制品,文中运用Moldflow软件对单双浇口进行流动模拟分析,预测填充的平衡性、熔接痕的位置及数量、翘曲变形。通过比较分析结果,确定最佳的浇口位置和数量,从而减少试模次数,获得最佳的制品,用于指导实际生产,获得最大经济效益。

In order to obtain better products,Moldflow software was used for simulation analysis of single and double gate flow,prediction of filling balance,weld line location and quantity and warping deformation.By comparing the results of the analyses,the optimal gate location and quantity was determined,and the number of test mode was reduced and the best products were obtained.It was used to guide the actual production and obtain the maximum economic benefit.