摘要
A chatter experiment of micro-miniature turn-milling was carried out in this paper. In or- der to reduce the effect that the natural frequencies of workpieces brought to the chatter experiments of micro-miniature turn-milling, both positive and negative cone-shape workpieces were used . The chatter frequency of micro-miniature turn-milling process was obtained by the sampling and analyzing systems. Then by applying excitation experiments to the workpiece system and tool system respec- tively, the natural frequencies of these two systems were obtained. By comparing chatter frequency of micro-miniature turn-milling process with the natural frequencies of workpiece system and tool system, we found that chatter frequency of micro-miniature turn-milUng was close to the natural fre- quency of the low stiffness vibration body in the machine tool system. The funding could be useful for optimizing the structure of machine-tool and designing the machining process.
A chatter experiment of micro-miniature turn-milling was carried out in this paper. In or- der to reduce the effect that the natural frequencies of workpieces brought to the chatter experiments of micro-miniature turn-milling, both positive and negative cone-shape workpieces were used . The chatter frequency of micro-miniature turn-milling process was obtained by the sampling and analyzing systems. Then by applying excitation experiments to the workpiece system and tool system respec- tively, the natural frequencies of these two systems were obtained. By comparing chatter frequency of micro-miniature turn-milling process with the natural frequencies of workpiece system and tool system, we found that chatter frequency of micro-miniature turn-milUng was close to the natural fre- quency of the low stiffness vibration body in the machine tool system. The funding could be useful for optimizing the structure of machine-tool and designing the machining process.
基金
Supported by National Defense Basic Scientific Research Project(A092000000)
High Quality CNC Machine Tool and BasicManufacturing Equipment Scientific Major Project(2012ZX04010-061)
