RL型截面冷弯薄壁型钢的畸变屈曲荷载算式

Distortional Buckling Formulae of Cold-Formed Thin-Walled Rack Members Upright with Rear Flange and Additional Lip Stiffeners

为了对RL型截面冷弯薄壁型钢的畸变屈曲作进一步研究,以既有研究成果为基础,根据广义梁理论推导了两端简支和固支边界条件下RL型截面冷弯薄壁型钢的畸变屈曲荷载计算式。通过求解矩阵的广义特征值,利用推导的算式计算RL型截面型钢构件在轴压、绕弱轴和强轴弯曲下的畸变屈曲荷载和屈曲半波长,并与有限条软件CUFSM分析结果和既有理论公式的解相比,结果表明所得算式具有较高的精度。公式推导过程和结论可以为工程设计和进一步研究中计算畸变屈曲荷载提供参考。

According to the generalised beam theory based on the exist studies, the aim of this paper is to derive the distortional buckling formulae of pined or fixed cold-formed thin-walled rack members upright with rear flanges and additional lip stiffeners. The formulae is adopted to calculate the distortional buckling load and the buckling half-wave length of the member subiected to axial compression or minor and major axis bending. Meanwhile, the results are compared to those of finite strip program CUFSM and other analytical formulae. The derived formulae is proved to be accurate enough. As a result, it may be directly used in practical design as well as further study.