摘要
以造纸法再造烟叶产品A均为基础,考察时间、温度、波美度等因素对涂布液A黏度的影响.结果表明:随着流动时间的增长,体系波美度大于25。B6时涂布液A黏度逐渐升高,体系波美度低于25°Be时涂布液A黏度几乎无影响;涂布液A的波美度对体系黏度的影响较大.由此得到造纸法再造烟叶在生产过程中的适宜涂布条件为:涂布液A波美度24—25°Be,体系温度60-65℃.
The impact of time, temperature and Baume degree on the viscosity of sizing liquor A on the ba- sis of paper-making reconstituted tobacco product A was studied. The results showed that,with the increase of flowing time, the viscosity of coating liquid A increased gradually when Baume degree was over 25°Be, while it had no influence to the viscosity when Baume degree lower than 25°Be; and Baume degree had great influence on the viscosity of coating liquid. It could be concluded that the following favorable coating conditions should be satisfied for paper-making reconstituted tobacco manufacturing : Baume degree of coat- ing liquid was about 24 ~ 25~B6 and temperature was 60 - 65 ℃.
出处
《郑州轻工业学院学报(自然科学版)》
CAS
2014年第1期63-66,82,共5页
Journal of Zhengzhou University of Light Industry:Natural Science
基金
国家烟草专卖局科技司项目(粤烟I05XM-QK[2012]006)
关键词
造纸法再造烟叶
涂布液A
流变性
黏度
paper-making reconstituted tobacco
coating liquid A
rheological behavior
viscosity