摘要
针对香烟滤棒香料线在丝束喷嘴入口处与丝束汇合、进入成型机难以实现准确定位的难题,对KDF2滤棒成型机香料线定位技术进行了改进:在丝束喷嘴支架上开设定位孔,香料线可以调节出口位置的导管,定位孔直接进入冷粘室与丝束汇合.改进结果表明,所生产香线型滤棒香料线定位值平均为3.84 mm,误差小于±1 mm,完全消除了因香料液与热胶接触融合造成滤棒爆口现象,使成品滤棒合格率达到99.44%以上.
Aiming at the problem that the cigarette filter rod spice line was difficult to achieve accurate po- sitioning when it converged into the tow nozzle entrance, according to KDF2 filter rod forming machine, the spice line positioning technology was improved. A positioning hole was arranged on the tow nozzle bracket, it could get into cold bonding room directly converging with tow. The spice line could adjust the export po- sition. The improved results showed that, the fragrance line location value of incense linear filter rod was 3.84 mm on average, the error was less than + 1 mm. It completely eliminated when the spice liquid was mixed with hot glue. The qualification rate of filter rod seam open reached 99. phenomenon 44%.
出处
《郑州轻工业学院学报(自然科学版)》
CAS
2014年第1期70-73,共4页
Journal of Zhengzhou University of Light Industry:Natural Science
关键词
KDF2滤棒成型机
香料线定位技术
香烟滤棒
KDF2 filter rod forming machine
spice line positioning technology
cigarette filter rod