摘要
在ZigBee技术的基础上,设计了一种基于STC12C5A60S2的手持便携式简便智能家居控制终端,并作出底层控制模块的详细硬件设计方案。主ZigBee(coordinator)模块与手持终端连接,从ZigBee(rounter)模块与底层单片机通讯,控制照明系统、窗帘系统、风扇系统和空调系统等。其中着重设计窗帘系统和风扇系统的闭环控制,能够根据光照度和实时温度调节家居内的明暗和温度。该套智能家居模型已搭建并正常运行,通过测试15m之内系统能够较好地通讯,系统硬件成本低,方便使用并具有较好的实用性。
Based on the ZigBee technology, a hand-held portable intelligent home controlled terminal is designed on the basis of STCI2C5A60S2 MCU, and make a detailed hardware dcsign with floor control module.Main ZigBee（coorclinator）module is connected with the handheld terminal and salved ZigBec（rountcr）module communicate with the underlying chip so that lighting systcm, window treatments, fans system and air condi6oning system are controlled.This paper focuses on designing closed loop system by curtain and fan control systems. According to light intensity and real-time temperature, the system control brightness and temperature inside the home.The set of intelligent home model has been set up and run normally, passed the test system better able to communicate within 15m, and system low cost, easy to use and has good practicability.
出处
《电子世界》
2014年第6期107-109,共3页
Electronics World
基金
广州市越秀区企业科技特派员行动计划专项(2013-TP-001)资助
