期刊文献+

非对称衍射法测量反极图 被引量:1

Measurement of Inverse Pole Figure by Asymmetric X-Ray Diffraction Method
下载PDF
导出
摘要 介绍了一种在X-射线衍射仪上采用非对称衍射方式测量反极图的方法。该方法的特点是:与对称衍射方式相比,非对称衍射方式测量的反极图中的极密度的大小既包含了在对称衍射方式下能产生衍射的晶粒对极密度的贡献,也包含了与对称衍射晶粒有一定取向差的晶粒对极密度的贡献,因而采用该方法测量反极图更科学,所测结果更接近真值。 A method for measuring the inverse pole figure with an asymmetric diffraction manner by X-ray diffractometer is introduced. Compared with the symmetric diffraction manner, the pole density of the inverse pole figure measured by asymmetric diffraction method contains the contribu-tions from both the crystal grains generating diffraction in the symmetric diffraction manner and the crystal grains having an orientation difference with the above mentioned symmetric diffraction grains. Through the method introduced in this paper, a more scientific inverse pole figure and more true results can be obtained.
出处 《电工材料》 CAS 2014年第1期36-38,共3页 Electrical Engineering Materials
关键词 X-射线衍射仪 非对称衍射 反极图 X-ray diffractometer asymmetric diffraction inverse pole figure
  • 相关文献

参考文献2

二级参考文献10

  • 1王春芳,时捷,王毛球,惠卫军,董瀚.EBSD分析技术及其在钢铁材料研究中的应用[J].钢铁研究学报,2007,19(4):6-11. 被引量:23
  • 2周顺兵.铈对Fe-Cr-Ni-Nb-Ti-Al-W合金持久寿命及晶界析出相的影响[J].钢铁研究学报,2007,19(4):51-53. 被引量:7
  • 3Jong-Tae Park, Jerzy A Szpunar. Development During Grain Growth in Nonoriented Eletrieal Steels[J].ISIJ International, 2005,45(5) : 743 - 749.
  • 4Hutchinson B E.Nes: Grain Growth in Polycrystalline Materials, Trans[ M ]. Tech. Publications, Zurich, 1992.
  • 5Balke P : Ph. D. Thesis[ D ]. University of Groningen, the Netherlands, 2002.
  • 6Hayakawa Y, Szpunar J A.The Role of Grain Boundary Character Distribution in Secondary Recrystallization Electrical Steels[J ]. Acta Mater, 1997, 45(3) : 1285 - 1288.
  • 7Hayakawa Y, Szpunar J A. A New Model of Goss Texture Development during Secondary Recrystallization of Electrical Steel[J ]. Acta Mater, 1997, 45(11) :4713 - 4715.
  • 8Rajmohan N,Szpunar J A. Monte-Carlo Simulation of Goss Texture Development in Silicon Steel in the Presence of MnS Particles[J ]. Mater. Sct. Eng. A, 2000, A289:99 - 101.
  • 9[4]Mao,CHEN N,YU Y.Relationship between Texture,Magnetic Induction and Maximum Magnetic Permeability of Si Steels[C].Szpunar J A.Proc.12.inter.conf.Textures of Materials.Montreal:NRC Reaech Press,1999.1:511-516.
  • 10何忠治.电工钢[M].北京:冶金工业出版社,1997.

共引文献10

同被引文献2

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部