摘要
采用自制稀土粉末渗硼剂在680℃下对淬火态Cr12MoV钢进行9 h稀土硼共渗,较为系统地研究了渗硼前后的微观形貌、显微硬度及其与Al2O3陶瓷球对磨的摩擦磨损行为。结果表明:经低温稀土渗硼后,淬火态Cr12MoV钢耐磨性得到大幅提高,磨损量仅为渗硼前的36.2%。
RE-boronizing at 680 ℃ for 9 h with homemade boronizing supply agent for hardened Crl2MoV steel was carried out. Microstructure, microhardness and frictional wear behaviors with A1203 ceramic ball of hardened Crl2MoV steel before and after the boronizing were studied. Results show that the wear resistance of hardened Crl2MoV steel is improved after RE-boronizing at low temperature, which wear-volume is only 36.2% of that of the hardened Crl2MoV steel without boronizing.
出处
《热加工工艺》
CSCD
北大核心
2014年第8期223-225,共3页
Hot Working Technology
基金
江苏省高等学校大学生实践创新训练计划重点项目(苏教办高〔2012〕11号)
江苏大学高级人才科研启动基金资助项目(11JDG126)
关键词
CR12MOV钢
低温稀土渗硼
耐磨性
淬火态
Crl 2MoV steel
RE-boronizing at low temperature
wear resistance
hardened state
