期刊文献+

基于CMOS SOI工艺的射频开关设计 被引量:7

RF Switch Design Based on CMOS SOI Technology
下载PDF
导出
摘要 采用0.18μm CMOS SOI工艺技术研制加工的单刀双掷射频开关,集成了开关电路、驱动器和静电保护电路。在DC^6GHz频带内,测得插入损耗0.7dB@2GHz、1dB@4GHz、1.5dB@6GHz,隔离度37dB@2GHz、31dB@4GHz、27dB@6GHz,在5GHz以内端口输入输出驻波比≤1.5:1,输入功率1dB压缩点达到33dBm,IP3达到42dBm。可应用于移动通信系统。 A single-pole double-through(SPDT) RF switch has been designed and fabricated using 0.18 μm CMOS SOI technology. It integrates switch circuits, drivers and ESD protect circuits. The measurement results are as follows: in the frequency range of DC-6 GHz, insertion loss≤0.7 dB@2 GHz, 41 dB@4 GHz,≤1. 5 dB@6 GHz; isolation≥37 dB@2 GHz, ≥31 dB@ 4 GHz, ≥27 dB@6 GHz, input and output VSWS≤1. 5.1 within 5 GHz, input 1 dB compression point P-1db≥33 dBm, IP3≥42 dBm. This switch is applicable for mobile communication system.
出处 《固体电子学研究与进展》 CAS CSCD 北大核心 2014年第2期142-145,162,共5页 Research & Progress of SSE
关键词 互补金属氧化物半导体 绝缘衬底上硅 射频开关 驱动器 集成 complementary metal oxide semiconductor(CMOS) silicon-on-insulator(SOI) RF switch driver integration
  • 相关文献

参考文献5

  • 1Botula A, Joseph A, Slinkman J, et al. A SOI 180 nm CMOS RF switch technology[C]. Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems Digest, 2009: 152-155.
  • 2Jeong J, Pornpromlikit S, Scuderi A, et al. High power digitally-controlled SOI CMOS attenuator with wide attenuation range [J]. IEEE Microwave and Wireless Components Letters, 2011, 21(8):433-435.
  • 3Shahidi G G. SOI technology for the GHz era[J]. IBM Journal of Research and Development, 2002, 46 (2/3): 121-131.
  • 4Orlando P, Groves K, Mattamana A, et al. X-band receiver front-end in fully depleted SOI technology [C]. IEEE International Conference on Ultra-Wide-band Digest, 2012, :288-291.
  • 5Blaschke V, Zwingman R, Hurwitz P, et al. A linear-throw SP6T antenna switch in 180 nm CMOS thick- film SOI[C]. IEEE International Conference on Mi- crowave Communication Antennas and Electronics Systems Digest, 2011 : 1-4.

同被引文献37

引证文献7

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部