摘要
针对三辊斜轧穿孔工艺的特点,利用有限元方法对其工艺进行了模拟,分析了管坯在三辊穿轧过程中等效应变、等效应力分布以及轧辊扭矩、顶头受力的变化情况。将模拟结果与实验结果进行对比,模拟结果与试验结果基本吻合,可以作为新工艺开发和理论研究的参考。通过实验进一步分析了生产中存在的尾环、轴承失效等故障原因,可为设备的设计和工艺改进提供指导。
Aiming at the characteristics of three-roll rotary piercing process, the process was simulated by using the fmite element method. The equivalent strain and equivalent stress distribution as well as roll torque and top force of the tube blank were analyzed. Compared the simulation results with the measured data, the simulation results agree well with the test results, which can provide a reference for theoretical studies and the development of new processes. The reasons for tail ring and bearing failures were further analyzed through experiment, which can provide a guiding for equipment design and process improvement.
出处
《热加工工艺》
CSCD
北大核心
2014年第9期95-98,105,共5页
Hot Working Technology
基金
国家自然科学基金资助项目(0954003)
山西省青年科学基金资助项目(012021019-4)
山西省回国留学人员科研资助项目(2012-074)
关键词
三辊斜轧穿孔
无缝钢管
尾环
轴承
three-roll cross piercing
seamless steel tube
ring tail
bearing
