期刊文献+

计量核查技术在差压式天然气流量计量中的应用 被引量:9

Application of verification techniques in natural gas flow measurement using differential pressure flow meter
下载PDF
导出
摘要 天然气流量测量是一种连续的测量、一种不可重复的测量、一种因测量结果不正确会引起后续的昂贵代价的测量,需要严密的测量过程控制。核查是实施测量过程控制、确保计量结果准确可靠的重要方法之一,不仅适用于实验室,也适用于工业计量。通过对国内外核查方法应用情况的分析,提出了开发天然气流量计量核查系统的项目,付诸实施后,取得了明显效果。 As a continuous and unrepeated measurement ,natural gas flow measurement may-be cause high cost from incorrect measurement .Hence ,it is necessary to be strict in the process control of gas flow measurement .To ensure measurement accurate and reliable ,the verification technique is one of the effective methods to implement process control ,and it not only be applied in laboratory ,but also be widely applied in industrial metrology .The paper analyzes the applica-tions of the verification method at home and abroad ,proposes the development project of verifica-tion system used in natural gas flow measurement ,which is put into practice and achieve remark-able results .
出处 《石油与天然气化工》 CAS CSCD 2014年第1期91-93,共3页 Chemical engineering of oil & gas
关键词 天然气 流量 计量 核查 应用 naturalgas,flow,measurement,verification,application
  • 相关文献

参考文献5

  • 1全国质量管理和质量保证标准化技术委员会.GB/T19022-2003测量管理体系测量过程和测量设备的要求[S].北京:中国标准出版社,2004-03-01.
  • 2中国石油天然气集团公司.GB/T18603-2001天然气计量系统技术要求[S].北京:中国标准出版社,2004-04-08.
  • 3石油工业油气计量及分析方法专业标准化技术委员会.GB/T21446-2008用标准孔板流量计测量天然气流量[S].北京:中国标准出版社,2008-08-01.
  • 4Richard Steven Josh Kinney.国际标准文件 孔板流量计-案例研究(英文)[J].石油与天然气化工,2011,40(6):543-552. 被引量:5
  • 5黄明轩,石中锁.用VC实现智能涡轮流量计与上位机的通信[J].石油与天然气化工,2005,34(1):64-66. 被引量:4

二级参考文献12

  • 1International Standard Organization, 5167 Part 2.
  • 2American Gas Association Report No. 3, Part 1.
  • 3American National Standard Institution ANSI/API MPMS 14 3.1.
  • 4Schuster R A. Effect of entrained liquids on A gas measurement [J]. Pipe Line Industry Journal, February 1959.
  • 5Murdock J W. Two phase flow measurements with orifices [J]. Journal of Basic Engineering, December 1962,84: 419-433.
  • 6Chisholm D. Flow of incompressible twophase mixtures through sharp edged orifiees[J]. Journal of Mechanical Engineering Science, 1967, 9(1) .
  • 7Chisholm D. Research Note: Two Phase Flow Through Sharp Edged Orifices [J]. Journal of Mechanical Engineering Sci ence, 1977,19(3).
  • 8McConaghy B J. Bell D G, and Studzinski W. How orifice-plate condition affects measurement accuracy[J]. Pipe Line In dustry, December 1989.
  • 9Ting V C, et al. Effect of liquid Entrainment on the accuracy of orifice meters for gas flow measurement. Int. Gas Research Conference, 1993.
  • 10Hall A, Stobie G, Steven R. Further evaluation of the performance of horizontally installed orifice plate and cone differ ential pressure meters with wet gas flows. International South East Asia Hydrocarbon Flow Measurement Workshop, Kuala Lumpur, Malaysia, March 2008.

共引文献7

同被引文献59

引证文献9

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部